If reading the sysattr failed with such error, the whole operation in
net_id builtin command will fail, and the interface will not be renamed.
Fixes a bug introduced by 5bbcfbaa11.
Oct 03 17:33:20 systemd-tmpfiles[872]: Assertion 'IN_SET(i->type, CREATE_BLOCK_DEVICE|CREATE_CHAR_DEVICE)' failed at src/tmpfiles/tmpfiles.c:1837, function create_device(). Aborting.
I think this is caused by the line:
b! /dev/private/smartmontools-dev/sda 0660 root disk - 8:0
If the lifetime of the route is already expired, do not try to
configure it.
Fixes a use-after-free, as the Request object is already freed, thus, we
cannot use Route or Link stored in Request object.
IPv6 Neighbor Discovery lets us autoconfigure a link's IPv6 addresses,
routes, DNS servers, and DNS search domains by listening for Router
Advertisement (RA) packets broadcast by one or more routers on the link.
Each RA can contain zero or more "options," each describing one piece of
configuration (e.g. a single route).
Currently, when we receive an RA from a router, we delete any addresses,
routes, etc. that originated from that router's previous RAs unless
they're also present as options in the new RA.
That behavior is a violation of RFC 4861[1]. In Section 9, the RFC
states that
Senders MAY send a subset of options in different packets. ... Thus,
a receiver MUST NOT associate any action with the absence of an
option in a particular packet. This protocol specifies that
receivers should only act on the expiration of timers and on the
information that is received in the packets.
Several other passages in the RFC reiterate this. Section 6.2.3:
A router MAY choose not to include some or all options when sending
unsolicited Router Advertisements.
Section 6.3.4:
Hosts accept the union of all received information; the receipt of a
Router Advertisement MUST NOT invalidate all information received in
a previous advertisement or from another source.
At least one consumer router in production today, the Google Nest Wifi,
often sends RAs that omit its global IPv6 prefix. When current versions
of systemd-networkd receive those RAs, they immediately delete the
interface's global IPv6 address, which breaks IPv6 connectivity.
Fix the issue by removing the invalidation logic entirely. It's not
needed at all, since we already invalidate addresses, routes, and DNS
configuration when the interface goes down or their lifetimes expire.
This fix does have the side effect of preventing changes to the .network
file (e.g. denylisted prefixes, whether to add routes from RAs) from
taking effect as soon as a new RA arrives. Instead, a full interface
reconfiguration is needed. But triggering those changes on RA receipt
was already rather arbitrary and out of the administrator's control, so
I think this change is fine.
commit 69203fba70 ("network: ndisc: remove old addresses and routes
after at least one SLAAC address becomes ready") introduced this
behavior. commit 50550722e3 fixed it partially, by preventing one
router's RAs from invalidating another router's configuration.
[1] https://www.rfc-editor.org/rfc/rfc4861
Fixes: 69203fba70 ("network: ndisc: remove old addresses and routes after at least one SLAAC address becomes ready")
The iscsi-init.service calls `sh` which might, in certain circumstances,
pull in instrumented systemd NSS modules causing `sh` to fail. Let's mitigate
this by pulling in an env file crafted by `create_asan_wrapper()` that
(among others) pre-loads ASan's DSO.
Add new key mappings for the HP Elite Dragonfly G2 laptop:
1. Map Fn+F12 (HP Programmable Key) to prog1.
2. Unmap Fn+F11 (Airplane mode) from atkbd and Intel HID events, as this
key is also reported by HP Wireless hotkeys.
The code to evaluate the kernel command line option was busted because it
was doing 'return b == !!r' at a point where 'r > 0'. Thus we'd return "true"
in both cases:
$ SYSTEMD_PROC_CMDLINE=systemd.condition-first-boot build/systemd-analyze condition 'ConditionFirstBoot=true'
test.service: ConditionFirstBoot=true succeeded.
Conditions succeeded.
$ SYSTEMD_PROC_CMDLINE=systemd.condition-first-boot build/systemd-analyze condition 'ConditionFirstBoot=false'
test.service: ConditionFirstBoot=false succeeded.
Conditions succeeded.
We only use 'ConditionFirstBoot=true' in units, so this wasn't noticed.
But I think the logic is broken in general: the condition should evaluate as
true only during initial boot. If we rerun the units at later points, we should
not consider ConditionFirstBoot to be true.
Also, the first boot logic is also used in pid1 itself. AFAICT, for two
things: in first boot machine-id is initialized transiently (this allows
first-boot operations to be restarted if boot fails), and preset-all is
executed. But this logic was different and separate from the logic to
evaluate ConditionFirstBoot. The distinction is abolished, and the operations
in pid1 now use the same logic as ConditionFirstBoot, which means that the
kernel command line option is checked, and condition_test_first_boot()
just tests whether pid1 thinks we're in first boot.
This makes things easier to grok for the user: there's just one condition for
"first boot" and it applies to both pid1 and units.
The text made it sound like breaking ABI in libsystemd is allowed with good reasons.
In fact, we plan never to do this, so make the language stronger.
Also remind people about distro forums for reporting bugs. Those are probably a
better place than systemd-devel for new users.
Also, add some missing articles and apostrophes, fix URLs, remove repeated phrases,
etc.
$ SYSTEMD_LOG_LEVEL=debug build/systemd-firstboot --prompt-root-password
Found container virtualization systemd-nspawn.
Found /etc/locale.conf, assuming locale information has been configured.
Failed to read credential firstboot.keymap, ignoring: No such device or address
Prompting for keymap was not requested.
Found /etc/localtime, assuming timezone has been configured.
Prompting for hostname was not requested.
Found /etc/machine-id, assuming machine-id has been configured.
Found /etc/passwd and /etc/shadow, assuming root account has been initialized.
Creation of /etc/kernel/cmdline was not requested, skipping.
If the executable path is prefixed with "-", an exit code of the command
normally considered a failure (i.e. non-zero exit status or abnormal exit
due to signal) is recorded, but has no further effect and is considered
equivalent to success.
Let's honor this with `systemctl status`, and color ignored exit status
in yellow, not red.
This is useful for systems which don't have any fsck.
We already skip emitting the fsck dependency when the fsck.$fstype helper
is missing, but fstab-generator doesn't necessarily know the fstype when
handling the root= parameter.
Previously, systemd-fsck was started for these mounts and then exited
immediately because it couldn't find the fsck.$fstype helper.
Allows to skip check that ensures units must not be running.
I have a use case that would use reattach, except the orchestrator
is using a non-standard versioning scheme, so image matching cannot
work. As a workaround, need to be able to detach and then attach
manually, without stopping the units to avoid extended downtimes
and loss of FD store.
Marius Vollmer
Luca Boccassi
Lennart Poettering
Yu Watanabe
Zbigniew Jędrzejewski-Szmek
drosdeck
Topi Miettinen
Daan De Meyer
Thomas Hebb
Frantisek Sumsal
Maxim Mikityanskiy
Clyde Byrd III
dependabot[bot]
James Hilliard
Jacek Migacz
Christian Hesse
Jonas Kümmerlin