Before this patch:
# systemctl --runtime mask abuild.mount does-not-exist.mount does-also-not-exist.mount
Unit abuild.mount does not exist, proceeding anyway.
Unit abuild.mount does not exist, proceeding anyway.
Unit abuild.mount does not exist, proceeding anyway.
Created symlink /run/systemd/system/abuild.mount → /dev/null.
Created symlink /run/systemd/system/does-not-exist.mount → /dev/null.
Created symlink /run/systemd/system/does-also-not-exist.mount → /dev/null.
After this patch:
# systemctl --runtime mask abuild.mount does-not-exist.mount does-also-not-exist.mount
Unit abuild.mount does not exist, proceeding anyway.
Unit does-not-exist.mount does not exist, proceeding anyway.
Unit does-also-not-exist.mount does not exist, proceeding anyway.
Created symlink /run/systemd/system/abuild.mount → /dev/null.
Created symlink /run/systemd/system/does-not-exist.mount → /dev/null.
Created symlink /run/systemd/system/does-also-not-exist.mount → /dev/null.
These lines are generally out-of-date, incomplete and unnecessary. With
SPDX and git repository much more accurate and fine grained information
about licensing and authorship is available, hence let's drop the
per-file copyright notice. Of course, removing copyright lines of others
is problematic, hence this commit only removes my own lines and leaves
all others untouched. It might be nicer if sooner or later those could
go away too, making git the only and accurate source of authorship
information.
This part of the copyright blurb stems from the GPL use recommendations:
https://www.gnu.org/licenses/gpl-howto.en.html
The concept appears to originate in times where version control was per
file, instead of per tree, and was a way to glue the files together.
Ultimately, we nowadays don't live in that world anymore, and this
information is entirely useless anyway, as people are very welcome to
copy these files into any projects they like, and they shouldn't have to
change bits that are part of our copyright header for that.
hence, let's just get rid of this old cruft, and shorten our codebase a
bit.
Since bb28e68477 parsing failures of
certain unit file settings will result in load failures of units. This
introduces a new load state "bad-setting" that is entered in precisely
this case.
With this addition error messages on bad settings should be a lot more
explicit, as we don't have to show some generic "errno" error in that
case, but can explicitly say that a bad setting is at fault.
Internally this unit load state is entered as soon as any configuration
loader call returns ENOEXEC. Hence: config parser calls should return
ENOEXEC now for such essential unit file settings. Turns out, they
generally already do.
Fixes: #9107
'systemctl disable --runtime' would disable a unit, but only if it was enabled
with '--runtime', and silently do nothing if the unit was enabled persistently.
And similarly 'systemctl disable' would do nothing if the unit was enabled in
/run. This just doesn't seem useful.
This pathch changes enable/disable and mask/unmask to be asymmetrical. enable
and mask create symlinks in /etc or /run, depending on whether --runtime was
specified. disable and unmask remove symlinks from both locations. --runtime
cannot be specified for the disable and unmask verbs.
The advantage is that 'disable' now means that the unit is disabled, period.
And similarly for 'unmask', all masks are removed.
Similarly for preset and preset-all, they now cannot be called with --runtime,
and are asymmetrical: when they enable a unit, symlinks are created in /etc.
When they disable a unit, all symlinks are nuked.
$ systemctl --root=/ enable bluetooth
Created symlink /etc/systemd/system/dbus-org.bluez.service → /usr/lib/systemd/system/bluetooth.service.
Created symlink /etc/systemd/system/bluetooth.target.wants/bluetooth.service → /usr/lib/systemd/system/bluetooth.service.
$ systemctl --root=/ --runtime enable bluetooth
Created symlink /run/systemd/system/dbus-org.bluez.service → /usr/lib/systemd/system/bluetooth.service.
Created symlink /run/systemd/system/bluetooth.target.wants/bluetooth.service → /usr/lib/systemd/system/bluetooth.service.
$ systemctl --root=/ disable bluetooth
Removed /run/systemd/system/bluetooth.target.wants/bluetooth.service.
Removed /run/systemd/system/dbus-org.bluez.service.
Removed /etc/systemd/system/bluetooth.target.wants/bluetooth.service.
Removed /etc/systemd/system/dbus-org.bluez.service.
$ systemctl --root=/ disable --runtime bluetooth
--runtime cannot be used with disable
$ systemctl --root=/ mask --runtime bluetooth
Created symlink /run/systemd/system/bluetooth.service → /dev/null.
$ systemctl --root=/ mask bluetooth
Created symlink /etc/systemd/system/bluetooth.service → /dev/null.
$ systemctl --root=/ unmask bluetooth
Removed /run/systemd/system/bluetooth.service.
Removed /etc/systemd/system/bluetooth.service.
$ systemctl --root=/ unmask --runtime bluetooth
--runtime cannot be used with unmask
$ systemctl --root=/ --runtime enable bluetooth
Created symlink /run/systemd/system/dbus-org.bluez.service → /usr/lib/systemd/system/bluetooth.service.
Created symlink /run/systemd/system/bluetooth.target.wants/bluetooth.service → /usr/lib/systemd/system/bluetooth.service.
$ systemctl --root=/ enable bluetooth
Created symlink /etc/systemd/system/dbus-org.bluez.service → /usr/lib/systemd/system/bluetooth.service.
Created symlink /etc/systemd/system/bluetooth.target.wants/bluetooth.service → /usr/lib/systemd/system/bluetooth.service.
$ systemctl --root=/ preset bluetooth
Removed /run/systemd/system/bluetooth.target.wants/bluetooth.service.
Removed /run/systemd/system/dbus-org.bluez.service.
Removed /etc/systemd/system/bluetooth.target.wants/bluetooth.service.
Removed /etc/systemd/system/dbus-org.bluez.service.
$ systemctl --root=/ preset --runtime bluetooth
--runtime cannot be used with preset
$ systemctl preset-all --runtime
--runtime cannot be used with preset-all
Most our other parsing functions do this, let's do this here too,
internally we accept that anyway. Also, the closely related
load_env_file() and load_env_file_pairs() also do this, so let's be
systematic.
Currently, "reboot" behaves differently in setups with and without logind.
If logind is used (which is probably the more common case) the operation
is asynchronous, we should behave in the same way as "systemctl <verb>".
Let's clean this up, and always expose the same behaviour, regardless if
logind is used or not: let's always make it asynchronous.
See: #6479
Fixes: commit 130246d2e8
Previously we were a bit sloppy with the index and size types of arrays,
we'd regularly use unsigned. While I don't think this ever resulted in
real issues I think we should be more careful there and follow a
stricter regime: unless there's a strong reason not to use size_t for
array sizes and indexes, size_t it should be. Any allocations we do
ultimately will use size_t anyway, and converting forth and back between
unsigned and size_t will always be a source of problems.
Note that on 32bit machines "unsigned" and "size_t" are equivalent, and
on 64bit machines our arrays shouldn't grow that large anyway, and if
they do we have a problem, however that kind of overly large allocation
we have protections for usually, but for overflows we do not have that
so much, hence let's add it.
So yeah, it's a story of the current code being already "good enough",
but I think some extra type hygiene is better.
This patch tries to be comprehensive, but it probably isn't and I missed
a few cases. But I guess we can cover that later as we notice it. Among
smaller fixes, this changes:
1. strv_length()' return type becomes size_t
2. the unit file changes array size becomes size_t
3. DNS answer and query array sizes become size_t
Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=76745
This is used as 'systemd-analyze show-config systemd/logind.conf', which
will dump
/etc/systemd/system/user@.service
/etc/systemd/system/user@.service.d/*.conf
/run/systemd/system/user@.service.d/*.conf
/usr/local/lib/systemd/system/user@.service.d/*.conf
/usr/lib/systemd/system/user@.service.d/*.conf
The idea is to make it easy to dump the configuration using the same locations
and order that systemd programs use themselves (including masking, in the right
order, etc.). This is the generic variant that works with any configuration
scheme that follows the same general rules:
$ systemd-analyze cat-config systemd/system.conf
$ systemd-analyze cat-config systemd/user.conf
$ systemd-analyze cat-config systemd/logind.conf
$ systemd-analyze cat-config systemd/sleep.conf
$ systemd-analyze cat-config systemd/journald.conf
$ systemd-analyze cat-config systemd/journal-remote.conf
$ systemd-analyze cat-config systemd/journal-upload.conf
$ systemd-analyze cat-config systemd/coredump.conf
$ systemd-analyze cat-config systemd/resolved.conf
$ systemd-analyze cat-config systemd/timesyncd.conf
$ systemd-analyze cat-config udev/udev.conf
This drops a good number of type-specific _cleanup_ macros, and patches
all users to just use the generic ones.
In most recent code we abstained from defining type-specific macros, and
this basically removes all those added already, with the exception of
the really low-level ones.
Having explicit macros for this is not too useful, as the expression
without the extra macro is generally just 2ch wider. We should generally
emphesize generic code, unless there are really good reasons for
specific code, hence let's follow this in this case too.
Note that _cleanup_free_ and similar really low-level, libc'ish, Linux
API'ish macros continue to be defined, only the really high-level OO
ones are dropped. From now on this should really be the rule: for really
low-level stuff, such as memory allocation, fd handling and so one, go
ahead and define explicit per-type macros, but for high-level, specific
program code, just use the generic _cleanup_() macro directly, in order
to keep things simple and as readable as possible for the uninitiated.
Note that before this patch some of the APIs (notable libudev ones) were
already used with the high-level macros at some places and with the
generic _cleanup_ macro at others. With this patch we hence unify on the
latter.
Files which are installed as-is (any .service and other unit files, .conf
files, .policy files, etc), are left as is. My assumption is that SPDX
identifiers are not yet that well known, so it's better to retain the
extended header to avoid any doubt.
I also kept any copyright lines. We can probably remove them, but it'd nice to
obtain explicit acks from all involved authors before doing that.
Note: in check_triggering_units 'path' will be allocated twice. This is a
conscious choice, this way the implementation is simpler and not worth
optimizing.
Fixes#8519.
This adds flags BUS_MAP_STRDUP and BUS_MAP_BOOLEAN_AS_BOOL.
If BUS_MAP_STRDUP is set, then each "s" message is duplicated.
If BUS_MAP_BOOLEAN_AS_BOOL is set, then each "b" message is
written to a bool pointer.
Follow-up for #8488.
See https://github.com/systemd/systemd/pull/8488#discussion_r175816270.
This macro will read a pointer of any type, return it, and set the
pointer to NULL. This is useful as an explicit concept of passing
ownership of a memory area between pointers.
This takes inspiration from Rust:
https://doc.rust-lang.org/std/option/enum.Option.html#method.take
and was suggested by Alan Jenkins (@sourcejedi).
It drops ~160 lines of code from our codebase, which makes me like it.
Also, I think it clarifies passing of ownership, and thus helps
readability a bit (at least for the initiated who know the new macro)
The warning is not emitted for absolute paths like /dev/sda or /home, which are
converted to .device and .mount unit names without any fuss.
Most of the time it's unlikely that users use invalid unit names on purpose,
so let's warn them. Warnings are silenced when --quiet is used.
$ build/systemctl show -p Id hello@foo-bar/baz
Invalid unit name "hello@foo-bar/baz" was escaped as "hello@foo-bar-baz" (maybe you should use systemd-escape?)
Id=hello@foo-bar-baz.service
$ build/systemd-run --user --slice foo-bar/baz --unit foo-bar/foo true
Invalid unit name "foo-bar/foo" was escaped as "foo-bar-foo" (maybe you should use systemd-escape?)
Invalid unit name "foo-bar/baz" was escaped as "foo-bar-baz" (maybe you should use systemd-escape?)
Running as unit: foo-bar-foo.service
Fixes#8302.
Even if pager_open() fails, in general, we should continue the operations.
All erroneous cases in pager_open() show log message in the function.
So, it is not necessary to check the returned value.
Yu Watanabe
Zbigniew Jędrzejewski-Szmek
Lennart Poettering
Franck Bui
xginn8
Guillem Jover
Mike Gilbert
Mario Limonciello