When we are in late shutdown, and for whatever reason kexec fails, we should
proceed with a normal reboot. Network is down and sessions have been terminated
when we attempt to do the kexec, so rebooting normally is a better solution.
Logs from the case where the kexec kernel is not usable:
Mar 08 11:23:10 fuefi systemd[1]: Reached target Final Step.
Mar 08 11:23:10 fuefi systemd[1]: Starting Reboot via kexec...
Mar 08 11:23:10 fuefi systemctl[1480]: Cannot find the ESP partition mount point.
Mar 08 11:23:10 fuefi systemctl[1480]: Failed to load kexec kernel, continuing without.
Mar 08 11:23:10 fuefi systemd[1]: Shutting down.
... and then we proceed to do a normal reboot
Related to #7730.
Suspend to Hibernate is a new sleep method that invokes suspend
for a predefined period of time before automatically waking up
and hibernating the system.
It's similar to HybridSleep however there isn't a performance
impact on every suspend cycle.
It's intended to use with systems that may have a higher power
drain in their supported suspend states to prevent battery and
data loss over an extended suspend cycle.
Signed-off-by: Mario Limonciello <mario.limonciello@dell.com>
NAME is kind of meaningless, because everything has a name. "Unit"
makes it more obvious that a name of a unit is necessary. I was always
momentarily baffled by "set-property NAME ASSIGNMENT...", where there
are two objects (the unit and the property), and it's not clear which of
the two "NAME" is supposed to signify.
So far, we had two implementations of reboot-with-parameter doing pretty
much the same. Let's unify that in a generic implementation used by
both.
This is particulary nice as it unifies all /run/systemd/reboot-param
handling in a single .c file.
This is primarily preparation for a follow-up commit that adds a common
implementation of the other side of the reboot parameter file, i.e. the
code that reads the file and issues reboot() for it.
This mimics the raw_clone() call we have in place already and
establishes a new syscall wrapper raw_reboot() that wraps the kernel's
reboot() system call in a bit more low-level fashion that glibc's
reboot() wrapper. The main difference is that the extra "arg" argument
is supported.
Ultimately this just replaces the syscall wrapper implementation we
currently have at three places in our codebase by a single one.
With this change this means that all our syscall() invocations are
neatly separated out in static inline system call wrappers in our header
functions.
EnvironmentFile= is used in the unit file, but in the dbus,
the related field name is EnvironmentFiles=.
As the other variables, let's use the field name instead of the name
used in the unit file setting.
Previously, we'd explicitly use "GetUnit()" on the server side to
convert a unit name into a bus path, as that function will return an
error if the unit is not currently loaded. If we'd convert the path on
the client side, and access the unit this way directly the unit would be
loaded automatically in the background.
The old logic was done in order to minimize the effect of "is-active" on
the system, i.e. that a monoitoring command does not itself alter the
state of the system.
however, this is problematic as this can lead to confusing results if
the queried unit name is an alias that currently is not loaded: we'd
claim the unit wasn't active even though this isn't strictly true: the
unit the name is an alias for might be.
Hence, let's simplify the code, and accept that we might end up loading
a unit briefly here, and let's make "systemctl is-active" skip the
GetUnit() thing and calculate the unit path right away.
Fixes: #7875
Apparently O_NONBLOCK is the modern name used in most documentation and
for most cases in our sources. Let's hence replace the old alias
O_NDELAY and stick to O_NONBLOCK everywhere.
Let's remove a number of synchronization points from our service
startups: let's drop synchronous match installation, and let's opt for
asynchronous instead.
Also, let's use sd_bus_match_signal() instead of sd_bus_add_match()
where we can.
When we check the exit status of a subprocess, let's compare it with
EXIT_SUCCESS rather than 0 when looking for success.
This clarifies in code what kind of variable we are looking at and what
we are doing.
Using wait_for_terminate_and_check() instead of wait_for_terminate()
let's us simplify, shorten and unify the return value checking and
logging of waitid(). Hence, let's use it all over the place.
This new flag will cause safe_fork() to wait for the forked off child
before returning. This allows us to unify a number of cases where we
immediately wait on the forked off child, witout running any code in the
parent after the fork, and without direct interest in the precise exit
status of the process, except recgonizing EXIT_SUCCESS vs everything
else.
This renames wait_for_terminate_and_warn() to
wait_for_terminate_and_check(), and adds a flags parameter, that
controls how much to log: there's one flag that means we log about
abnormal stuff, and another one that controls whether we log about
non-zero exit codes. Finally, there's a shortcut flag value for logging
in both cases, as that's what we usually use.
All callers are accordingly updated. At three occasions duplicate logging
is removed, i.e. where the old function was called but logged in the
caller, too.
This adds a new safe_fork() wrapper around fork() and makes use of it
everywhere. The new wrapper does a couple of things we previously did
manually and separately in a safer, more correct and automatic way:
1. Optionally resets signal handlers/mask in the child
2. Sets a name on all processes we fork off right after forking off (and
the patch assigns useful names for all processes we fork off now,
following a systematic naming scheme: always enclosed in () – in order
to indicate that these are not proper, exec()ed processes, but only
forked off children, and if the process is long-running with only our
own code, without execve()'ing something else, it gets am "sd-" prefix.)
3. Optionally closes all file descriptors in the child
4. Optionally sets a PR_SET_DEATHSIG to SIGTERM in the child, in a safe
way so that the parent dying before this happens being handled
safely.
5. Optionally reopens the logs
6. Optionally connects stdin/stdout/stderr to /dev/null
7. Debug logs about the forked off processes.
Followup to previous commit. Suggested by @poettering.
Reindented the `verbs[]` tables to match the apparent previous
whitespace rules (indent to one flag, allow multiple flags to overflow?).
A lot of code references the `running_in_chroot()` function; while
I didn't dig I'm pretty certain this arose to deal with situations
like RPM package builds in `mock` - there we don't want the `%post`s
to `systemctl start` for example.
And actually this exact same use case arises for
[rpm-ostree](https://github.com/projectatomic/rpm-ostree/)
where we implement offline upgrades by default; the `%post`s are
always run in a new chroot using [bwrap](https://github.com/projectatomic/bubblewrap).
And here's the problem: bwrap creates proper mount roots, so it
passes `running_in_chroot()`, and then if a script tries to do
`systemctl start` we get:
`System has not been booted with systemd as init system (PID 1)`
but that's an *error*, unlike the `running_in_chroot()` case where we ignore.
Further complicating things is there are real world RPM packages
like `glusterfs` which end up invoking `systemctl start`.
A while ago, the `SYSTEMD_IGNORE_CHROOT` environment variable was
added for the inverse case of running in a chroot, but still wanting
to use systemd as PID 1 (presumably some broken initramfs setups?).
Let's introduce a `SYSTEMD_OFFLINE` environment variable for cases like
mock/rpm-ostree so we can force on the "ignore everything except preset" logic.
This way we'll still not start services even if mock switches to use nspawn or
bwrap or something else that isn't a chroot.
We also cleanly supercede the `SYSTEMD_IGNORE_CHROOT=1` which is now spelled
`SYSTEMD_OFFLINE=0`. (Suggested by @poettering)
Also I made things slightly nicer here and we now print the ignored operation.
This renames find_esp() to find_esp_and_warn() and tries to normalize its
behaviour:
1. Change the error that is returned when we can't find the ESP to
ENOKEY (from ENOENT). This way the error code can only mean one
thing: that our search loop didn't find a good candidate.
2. Really log about all errors, except for ENOKEY and EACCES, and
document the letter cases.
3. Normalize parameters to the call: separate out the path parameter in
two: an input path and an output path. That way the memory management
is clear: we will access the input parameter only for reading, and
only write out the output parameter, using malloc() memory.
Before the calling convention were quire surprising for internal API
code, as the path parameter had to be malloc() memory and might and
might not have changed.
4. Rename bootctl's find_esp_warn() to acquire_esp(), and make it a
simple wrapper around find_esp_warn(), that basically just adds the
friendly logging for the ENOKEY case. This rework removes double
logging in a number of error cases, as we no longer log here in
anything but ENOKEY, and leave that entirely to find_esp_warn().
5. find_esp_and_warn() now takes a bool flag parameter
"unprivileged_mode", which disables logging in the EACCES case, and
skips privileged validation of the path. This makes the function less
magic, and doesn't hide this internal silencing automatism from the
caller anymore.
With all that in place "bootctl list" and "bootctl status" work properly
(or as good as they can) when I invoke the tools whithout privileges on
my system where /boot is not world-readable
Let's not use local process data for remote processes, that can only
show nonsense.
Maybe one day we should add a bus API to query the comm field of a
process remotely, but for now, let's not bother, the information is
redundant anyway, as the cgroup data shows it too (and the cgroup tree
is show as part of status as well, and is requested from remote through
dbus, without local kernel calls).
Fixes: #7516
This message is displayed either when the unit file itself is newer than
what is loaded, but also when any of the drop-ins is newer. Say so in
the message, in order not to confuse the user unnecessarily.
Yu Watanabe
Zbigniew Jędrzejewski-Szmek
Mario Limonciello
Lennart Poettering
Douglas Christman
Reverend Homer
Colin Walters
Vito Caputo