The Pantech UML290 takes a horribly great time to initialize the SIM, and
therefore we may even be losing the 3GPP capabilities as the SIM is not
detected during the initial checks:
load_unlock_required_ready(): Couldn't check if unlock required: 'SIM failure: QMI protocol error (37): 'UimUninitialized''
current_capabilities_internal_load_unlock_required_ready(): Multimode device without SIM, no 3GPP capabilities
To avoid this, let 'UimUninitialized' be a retriable error.
QMI modems are incorrectly ignoring IMEI/ESN/MEID numbers that start with a
'0'. Fix this up. Seen on an AT&T Beam (340u)
Signed-off-by: David McCullough <david.mccullough@accelecon.com>
Instead of providing explicit dependency rules to generate the enum types
support files before they're first used, just pre-generate them before building
anything. Maintaining the explicit dependency rules is not really worth it.
This message gets printed for all netdevs and ttys, including most
machines normal ethernet/Wi-Fi interfaces. It seems a bit less critical
than 'warning' level would indicate.
ModemManager[32097]: <warn> Couldn't find support for device at '/sys/devices/pci0000:00/0000:00:19.0': not supported by any plugin
ModemManager[32097]: <warn> Couldn't find support for device at '/sys/devices/pci0000:00/0000:00:1c.1/0000:02:00.0': not supported by any plugin
Adding dynamic port identification for Telit modems that support AT#PORTCFG
command. Port configurations for HE910/UE910/UL865 taken from document
"HE910/UE910/UL865 Families Ports Arrangements User Guide"
If for any reason the modem is in OFF state and still can talk to the modem,
allow running the remaining transition requests to LOW or ON. This can happen
for example for modems that use CFUN:0, i.e. which can still go online with
CFUN=1.
https://bugs.freedesktop.org/show_bug.cgi?id=89368
There's no real need for a custom Gobi plugin any more. All the vendor-specific
Gobi-powered modems should be handled by vendor-provided plugins supporting QMI
modems; or otherwise, as a last resort, by the generic plugin.
For Dell-branded Novatel, Sierra and Ericsson modems.
The Novatel plugin will no longer accept every Dell-branded modem, which was
the current situation. Instead, a new Dell plugin will take care of probing for
the correct vendor string, and based on the results create a specific Novatel,
Sierra or Ericsson modem.
In order to properly support this, the Novatel, Sierra and MBM plugins now
export their implementations into non-inst libraries that the Dell plugin will
import.
Also, for now, the Dell plugin doesn't make any difference between e.g. Sierra
or Ericsson MBIM implementations, just a generic MBIM modem is created in both
cases, as that is anyway what the Ericsson MBM and Sierra plugins do already.
https://bugs.freedesktop.org/show_bug.cgi?id=86713
In short:
* The 'sierra-legacy' plugin will handle all the old AT based modems,
including the DirectIP ones. This plugin is filtered by driver ('sierra' or
'sierra_net') and forbidden-drivers ('qmi_wwan' and 'cdc_mbim'). This plugin
should also grab HP and AT&T branded models if they are handled by the
proper kernel driver.
* The 'sierra' plugin will only handle QMI or MBIM based Sierra modems, which
are really all the new ones. This plugin is filtered by VID (0x1199) and
driver (qmi_wwan and cdc_mbim).
For this separation to work, the 'sierra' and 'sierra_net' plugins need to be
complementary to each other.
We really do need a wait time to make sure most ports are exposed by the
kernel, so that plugin filters based on "forbidden-drivers" work correctly. E.g.
the "gobi" plugin now flags as forbidden the "qmi_wwan" driver, which means that
modems exposing both TTYs and QMI/WWAN ports should never be handled by the Gobi
plugin.
The new tester allows to play with the AT-capable TTY using the same code as
ModemManager itself.
$ sudo ./test/mmtty -d /dev/ttyHS0 --verbose
opening serial port '/dev/ttyHS0'...
(ttyHS0) opening serial port...
(ttyHS0): port attributes not fully set
(ttyHS0) device open count is 1 (open)
flashing serial port '/dev/ttyHS0'...
ready
> AT+GCAP
(ttyHS0): --> 'AT+GCAP<LF><CR>'
(ttyHS0): <-- '<CR><LF>+GCAP: +CGSM,+DS,+ES<CR><LF><CR><LF>OK<CR><LF>'
+GCAP: +CGSM,+DS,+ES
> AT+GMI
(ttyHS0): --> 'AT+GMI<LF><CR>'
(ttyHS0): <-- '<CR><LF>Option N.V.<CR><LF><CR><LF>OK<CR><LF>'
Option N.V.
> ^C
cancelling the main loop...
(ttyHS0) device open count is 0 (close)
(ttyHS0) closing serial port...
(ttyHS0) serial port closed
(ttyHS0) forced to close port
Dan Williams
Aleksander Morgado
Marc Murphy
David McCullough
Fabrice Bellet
Yunlian Jiang
Daniele Palmas
Jason Simmons