ITU rec v.250 (6.1.1) says:
The DTE should not include additional commands on the same command line after
the Z command because such commands may be ignored.
load_supported_storages may fail, which results in unallocated storage
memory. This patch modifies load_initial_sms_parts_from_storages and
is_storage_supported to handle that gracefully.
For 3GPP modems, we'll try with AT+WS46=?, which is the standard command to
query supported networks. If it returns error, we'll fallback to the defaults.
For CDMA modems, we'll try to gather CDMA1x and/or EV-DO support directly from
the AT+GCAP response.
Following the same logic as in commit 9ddcf92a, those contexts in the interface
which contain the setup of a timeout are cleared before removing the DBus
skeleton objects, so that we make sure they are not fired out once these have
been disposed.
expire_signal_quality() / mm_iface_modem_update_access_technologies()
may be called after the DBus object skeleton is removed in
mm_iface_modem_shutdown() and before their associated timeout source is
removed (in *_context_free) due to destruction of the modem object.
This patch fixes the issue by removing context objects before removing
the DBus skeleton in mm_iface_modem_shutdown().
When the serial port is not open, internal_queue_command
(mm-serial-port.c) invokes serial_probe_at_parse_response
(mm-port-probe.c) with a NULL response. This patch modifies
serial_probe_at_parse_response to handle NULL response properly.
Not all devices present a network interface, and on these devices
we need to fall back to PPP using the standard setup commands. But
they appear to support the Icera custom commands for access technology
and such, so still use those.
Hopefully fixes ZTE MF665C.
This patch makes it possible to use MM to set up PDP contexts with
PDP types other than 'IP', which is particularly useful when trying
to use the 'IPV6' or 'IPV4V6' PDP types defined in recent 3GPP specs.
If ip-type isn't specified, 'IP' will be used by default, due to the
fact that modem support for the 'IPV4V6' type is still rather scarce.
The patch applies to Aleksander's 'bearer-properties' branch. It has
been tested using mmcli in this fashion:
mmcli -m 0 --simple-connect=apn=internet # default to 'IP'
mmcli -m 0 --simple-connect=apn=internet,ip-type=IP
mmcli -m 0 --simple-connect=apn=internet,ip-type=IPV6
mmcli -m 0 --simple-connect=apn=internet,ip-type=IPV4V6
The base MMBearer object will receive the MMBearerProperties configuration,
which contains every generic and plugin-specific set up. Not every configuration
parameter will be used by every implementation (e.g. not every bearer needs
user/password).
The Bearer object will expose every configuration parameter received in its
`Properties' property in the interface, even if it's not really used.
Aleksander Morgado
Dan Williams
Ben Chan
Jiří Klimeš
Tore Anderson