The device would eventually be automatically probed. Add hints anyway,
as not to waste time with the generic probe.
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Function mm_parse_suple_address returns TRUE on valid input data
regardless of its type (URL or IP). As a result
qmi_message_loc_set_server_input_set_ipv4 was always called on valid
data. If URL was provided, then 0.0.0.0 ip address was sent to the
modem instead of provided URL.
Fixes: 6e84f3d459 ("iface-modem-location: validate SUPL server address")
Signed-off-by: Andrey Skvortsov <andrej.skvortzov@gmail.com>
It might be too late to register the indication callbacks after the
response is received. Register the callbacks when the request is made so
an requested indication will always be handled.
Signed-off-by: Richard Acayan <mailingradian@gmail.com>
Newer modem firmware requires the use of the GPS engine lock, which
controls what the GPS engine can do. Set the GPS engine lock when
appropriate to handle this newer firmware.
Signed-off-by: Richard Acayan <mailingradian@gmail.com>
By default, the Pixel 3a only emits $PQXXX traces, even when all the
desired traces are reported as enabled. A request to set the NMEA types
must still be sent to enable the GGA/GSA/GSV traces. Remove the
optimization that prevents the request from happening automatically.
Signed-off-by: Richard Acayan <mailingradian@gmail.com>
It was noted, that when supl server is set using IP address. Modem
doesn't connect to the SUPL server anymore. When IP address is inverted,
then modem connects to SUPL server successfuly.
IP address is stored as uint32_t. According to Telit's documentation [1]
numeric values are encoded in little-endian format in QMI.
After converting IP address from string to binary using inet_pton
IP address is stored in network byte order (big-endian). Therefore it's
needed another convertion from big-endian to host endianness. Final
conversion from host endianness to endianness needed for QMI will be
done in generated
qmi_message_pds_set_agps_config_input_set_location_server_address.
Vendor's Android GNSS hal uses htonl() to convert from struct in_addr
(already in big-endian) before sending QMI request as well [2].
Tested on Quectel EG25-G and SDM845 (OnePlus 6T).
1. FN980 Family Telit Proprietary QMI Command Reference Guide. 4.1.3.1 Byte Ordering
2. https://github.com/ugly-kid-af/device_xiaomi_violet/blob/snow/gps/gnss/GnssAdapter.cpp#L1110
Signed-off-by: Andrey Skvortsov <andrej.skvortzov@gmail.com>
Use the ones from the iso639 set 1.
Fixes: 0bd0cad70 ("cbm-part: Handle additional coding schemes and parse languages")
Signed-off-by: Guido Günther <agx@sigxcpu.org>
MV31 MBIM modem firmware revisions are not matched with carrier configs.
Different VoLTE profiles might be selected by the user causing
the carrier config revision to change.
Since fwupd uses this string for firmware updates, it gets confused and
thinks the user has an update available.
Signed-off-by: Florian Eckert <fe@dev.tdt.de>
Reading the hardware revision via the mbim interface returns an incorrect
hardware revision string. The output is always set to
'h/w revision: Thales Snapdragon X55'
Hardware | manufacturer: Cinterion
...
| h/w revision: Thales Snapdragon X55
This is an incorrect value returned by the MBIM interface. The MV31 and MV32
does have a dedicated AT Command to get the correct hardware revision
via 'AT+SKUID'. If the hardware revision is read via the AT command, the
output looks as follows.
Hardware | manufacturer: Cinterion
...
| h/w revision: V065
Signed-off-by: Florian Eckert <fe@dev.tdt.de>
Reading the revsion via the mbim interface returns an incorrect firmware
revsion string. This contains a '\n' character so that the revision looks
like this in 'mmcli'.
Hardware | manufacturer: Cinterion
| model: Cinterion PID 0x00F1 USB Mobile Broadband
| firmware revision: FDE.F0.3.0.1.1.DT.005
| 062
| carrier config: DT
The correct string without '\n' is returned via the AT interface. To fix
the error, the 'mbim' revision interface is overwritten with an AT call
if a MV31 or a MV32 is detected. So we get the correct output via 'mmcli'.
Hardware | manufacturer: Cinterion
| model: Cinterion PID 0x00F1 USB Mobile Broadband
| firmware revision: FDE.F0.3.0.1.1.DT.005.062
| carrier config: DT
Signed-off-by: Florian Eckert <fe@dev.tdt.de>
Otherwise only Setup() method for suboptimal polling is available to
non-privileged users.
Signed-off-by: Andrey Skvortsov <andrej.skvortzov@gmail.com>
Track when the timeout was started, so that if it needs to be increased
we can calculate how long the new timeout should be. Then cancel the
original timeout and start a new one with.
Signed-off-by: Dan Williams <dan@ioncontrol.co>
Andrey Skvortsov
Dan Williams
Lubomir Rintel
Piotr Drąg
Anders Jonsson
Felipe Borges
filmsi
Richard Acayan
Guido Günther
Lukas Voegl
Florian Eckert
Daniele Palmas