If the read-only FAT file attribute is set on /loader/random-seed,
don't update the seed file — and hence don't use it either, since a
seed we cannot update would be the same on every boot.
This gives users an explicit way to turn off random seed handling by
marking the file read-only, useful for example in pre-built OS images
that are replicated to many systems, where the baked-in seed is shared
and hence must not be credited.
The check is done upfront in process_random_seed(), before any other
work, mirroring the existing check for read-only volumes. This covers
both systemd-boot and systemd-stub, which share this code.
Inspired-by: #42979
Motivation:
Currently, when setting the default boot pattern, boot assessment status
is not taken into account. This means that with boot assessment enabled,
when an explicit boot entry is configured as the default entry using an
EFI var, as is common for instance in A/B boot schemes, the configured
entry will be booted indefinitly, regardless of the entry's boot
assessment status.
In order to allow for this use case in combination with boot assessment,
we introduce a new `preferred` keyword, both in the config file and in the
bootctl CLI, that acts very similar to the existing `default` keyword but
takes boot assessment into account and never selects any entries that
have been marked as bad.
If the preferred pattern does not resolve to any bootable entry, and a
default pattern is also specified, then the default pattern will be
considered next, and we may then still select a known-bad entry to be
booted.
Fixes: https://github.com/systemd/systemd/issues/31215
Fixes: https://github.com/systemd/systemd/issues/40192
In aad0d11e7c we stopped supporting XBOOTLDR
with a different fs driver. This was the primary example that comes to mind
when we talk about loading filesystem drivers in the firmware. Since we don't
want people to do load such drivers, use a different example.
Clarify in the docs that `if-safe` is the default by noting
that in the text for it, but also moving it to the first mentioned
option.
Make explicit in `man systemd-boot` that the `secure-boot-enroll`
option is specified in the `loader.conf`
Update an outdated comment in boot.c around the same.
Signed-off-by: Colin Walters <walters@verbum.org>
Unfortunately qemu still default to BIOS boot, so for the direct kernel
boot with an efi file to be of any use, the complex param used to switch
to UEFI mode needs to be provided.
Also add some links to qemu and OVMF.
https://github.com/systemd/systemd/pull/15509/files#r2234113960 complains that the
advice is still not clear enough. systemd-boot itself says
"Menu hidden. Hold down key at bootup to show menu."
so let's do the same and tell users to hold down space as the first option.
This should work fine for 99% of people. Then invert the following advice to
try repeated pressing as the alternative option.
Also, fix the advice about --boot-loader-menu=. The whole para is about getting
the menu to show, so 0 is not a good value.
Follow-up for https://github.com/systemd/systemd/pull/15509.
Some keys have only a transient effect, e.g. 'e', but some have a persistent
effect, e.g. 'd'. This is important informations, but the reader might be
forgiven for not finding that at all obvious when reading the descriptions of
the keys.
Also, mention in loader.conf man page that the settings there might be overriden
by EFI variables. This is another thing that is important but not obvious.
It turns out checking sysfs is not 100% reliable to figure out whether
the firmware had TPM2 support enabled or not. For example with EDK2 arm64, the
default upstream build config bundles TPM2 support with SecureBoot support,
so if the latter is disabled, TPM2 is also unavailable. But still, the ACPI
TPM2 table is created just as if it was enabled. So /sys/firmware/acpi/tables/TPM2
exists and looks correct, but there are no measurements, neither the firmware
nor the loader/stub can do them, and /sys/kernel/security/tpm0/binary_bios_measurements
does not exist.
The loader can use the apposite UEFI protocol to check, which is a more
definitive answer. Given userspace can also make use of this information, export
the bitmask with the list of active banks as-is. If it's not 0, then we can be
sure a working TPM2 was available in EFI mode.
Partially fixes https://github.com/systemd/systemd/issues/38071
Add support for a sysfail boot entry. Sysfail boot entries can be
used for optional tweaking the automatic selection order in case a
failure state of the system in some form is detected (boot firmware
failure etc).
The EFI variable `LoaderEntrySysFail` holds the boot loader entry to
be used in the event of a system failure. If a failure occurs, the reason
will be stored in the `LoaderSysFailReason` EFI variable.
sysfail_check() expected to be extented to support possible
conditions when we should boot sysfail("recovery") boot entry.
Signed-off-by: Igor Opaniuk <igor.opaniuk@foundries.io>
With this we can now do:
systemd-vmspawn -n -i foobar.raw -s io.systemd.boot.entries-extra:particleos-current.conf=$'title ParticleOS Current\nuki-url http://example.com/somedir/uki.efi'
Assuming sd-boot is available inside the ESP of foobar.raw a new item
will show up in the boot menu that allows booting directly into the
specified UKI.
First of all, these were always set, i.e. since sd-boot was merged into
our tree, i.e. v220. Let's say so explicitly.
Also, let's be more accurate, regarding which partition this referes to:
it's usually "the" ESP, but given that you can make firmware boot from
arbitrary disks, it could be any other partition too. Hence, be
explicit on this.
Also, clarify tha sd-stub will set this too, if sd-boot never set it.
usage:
(1) get latest revocation list for your architecture
from https://uefi.org/revocationlistfile
(2) copy the file to $ESP/loader/keys/$name/dbx.auth
The option was introduced with systemd v250 although it went
undocumented. It effectively sits between Default and OneShot, in term
of priority.
It is repeatedly updated as long as loader.conf default is "@saved" and
the OneShot is not set.
v2:
- squash some typos
v3:
- special mention to default @saved + loader.conf reference
- reword update side, to avoid misleading that it's needlessly
overwritten
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
The variable was introduced with systemd v250 although it went
completely undocumented, even though sd-boot will honour and print it
separately (from the loader.conf one) in the boot help screen.
Document it in the systemd-boot and hint about it in loader.conf manual
pages.
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
As I noticed a lot of missing information when trying to implement checking
for missing info. I reimplemented the version information script to be more
robust, and here is the result.
Follow up to ec07c3c80b
This tries to add information about when each option was added. It goes
back to version 183.
The version info is included from a separate file to allow generating it,
which would allow more control on the formatting of the final output.
This drops all mentions of gnu-efi and its manual build machinery. A
future commit will bring bootloader builds back. A new bootloader meson
option is now used to control whether to build sd-boot and its userspace
tooling.
Fixes#25780.
> Man page: crypttab.5
> Issue 1: Missing fullstop
> Issue 2: I<cipher=>, I<hash=>, I<size=> → B<cipher=>, B<hash=>, B<size=>
>
> "Force LUKS mode\\&. When this mode is used, the following options are "
> "ignored since they are provided by the LUKS header on the device: "
> "I<cipher=>, I<hash=>, I<size=>"
Seems OK to me. The full stop is there and has been for at least a few years. And we use <option> for the markup, which is appropriate here.
> Man page: crypttab.5
> Issue 1: Missing fullstop
> Issue 2: I<cipher=>, I<hash=>, I<keyfile-offset=>, I<keyfile-size=>, I<size=> → B<cipher=>, B<hash=>, B<keyfile-offset=>, B<keyfile-size=>, B<size=>
>
> "Use TrueCrypt encryption mode\\&. When this mode is used, the following "
> "options are ignored since they are provided by the TrueCrypt header on the "
> "device or do not apply: I<cipher=>, I<hash=>, I<keyfile-offset=>, I<keyfile-"
> "size=>, I<size=>"
Same.
> Man page: journalctl.1
> Issue 1: make be → may be
Fixed.
> Issue 2: below\\&. → below:
Fixed.
> Man page: journalctl.1
> Issue: Colon at the end?
>
> "The following commands are understood\\&. If none is specified the default "
> "is to display journal records\\&."
> msgstr ""
> "Die folgenden Befehle werden verstanden\\&. Falls keiner festgelegt ist, ist "
> "die Anzeige von Journal-Datensätzen die Vorgabe\\&."
This is a bit awkward, but I'm not sure how to fix it.
> Man page: kernel-install.8
> Issue: methods a fallback → methods fallback
It was correct, but I added a comma to make the sense clearer.
> Man page: loader.conf.5
> Issue 1: secure boot variables → Secure Boot variables
> Issue 2: one → one for (multiple times)
>
> "Supported secure boot variables are one database for authorized images, one "
> "key exchange key (KEK) and one platform key (PK)\\&. For more information, "
> "refer to the \\m[blue]B<UEFI specification>\\m[]\\&\\s-2\\u[2]\\d\\s+2, "
> "under Secure Boot and Driver Signing\\&. Another resource that describe the "
> "interplay of the different variables is the \\m[blue]B<EDK2 "
> "documentation>\\m[]\\&\\s-2\\u[3]\\d\\s+2\\&."
"one of" would sound strange. "One this and one that" is OK.
> Man page: loader.conf.5
> Issue: systemd-boot → B<systemd-boot>(7)
Fixed.
> Man page: logind.conf.5
> Issue: systemd-logind → B<systemd-logind>(8)
We use <filename>systemd-logind</> on subsequent references… I think that's good enough.
> Man page: nss-myhostname.8
> Issue: B<getent> → B<getent>(1)
Fixed.
> Man page: nss-resolve.8
> Issue: B<systemd-resolved> → B<systemd-resolved>(8)
The first reference does this, subsequent are shorter.
> Man page: os-release.5
> Issue: Portable Services → Portable Services Documentation?
Updated.
> Man page: pam_systemd_home.8
> Issue: auth and account use "reason", while session and password do not?
Reworded.
> Man page: portablectl.1
> Issue: In systemd-portabled.service(8): Portable Services Documentation
Updated.
> Man page: repart.d.5
> Issue: The partition → the partition
Fixed.
> Man page: repart.d.5
> Issue: B<systemd-repart> → B<systemd-repart>(8)
The first reference does this. I also change this one, because it's pretty far down in the text.
> Man page: systemd.1
> Issue: kernel command line twice?
>
> "Takes a boolean argument\\&. If false disables importing credentials from "
> "the kernel command line, qemu_fw_cfg subsystem or the kernel command line\\&."
Apparently this was fixed already.
> Man page: systemd-boot.7
> Issue: enrollement → enrollment
Fixed.
> Man page: systemd-cryptenroll.1
> Issue: multiple cases: any specified → the specified
Reworded.
> Man page: systemd-cryptenroll.1
> Issue: If this this → If this
Fixed tree-wide.
> Man page: systemd-cryptsetup-generator.8
> Issue: and the initrd → and in the initrd
"Is honoured by the initrd" is OK, because we often speak about the initrd as a single unit. But in the same paragraph we also used "in the initrd", which makes the other use look sloppy. I changed it to "in the initrd" everywhere in that file.
> Man page: systemd.directives.7
> Issue: Why are these two quoted (but not others)?
>
> "B<\\*(Aqh\\*(Aq>"
>
> B<\\*(Aqs\\*(Aq>"
>
> "B<\\*(Aqy\\*(Aq>"
This is autogenerated from files… We use slightly different markup in different files, and it's just too hard to make it consistent. We gave up on this.
> Man page: systemd.exec.5
> Issue 1: B<at>(1p) → B<at>(1)
> Issue 2: B<crontab>(1p) → B<crontab>(1)
Fixed.
> Man page: systemd.exec.5
> Issue: B<select()> → B<select>(2)
Fixed.
> Man page: systemd.exec.5
> Issue: qemu → B<qemu>(1)
The man page doesn't seem to be in any of the canonical places on the web.
I added a link to online docs.
> Man page: systemd.exec.5
> Issue: variable → variables
Seems to be fixed already.
> Man page: systemd-integritysetup-generator.8
> Issue: systemd-integritysetup-generator → B<systemd-integritysetup-generator>
I changed <filename> to <command>.
> Man page: systemd-integritysetup-generator.8
> Issue: superfluous comma at the end
Already fixed.
> Man page: systemd-measure.1
> Issue: (see B<--pcr-bank=>) below → (see B<--pcr-bank=> below)
Reworded.
> Man page: systemd-measure.1
> Issue: =PATH> → =>I<PATH>
Fixed.
> Man page: systemd-measure.1.po
> Issue: B<--bank=DIGEST> → B<--bank=>I<DIGEST>
Fixed.
> Man page: systemd.netdev.5
> Issue: os the → on the
Appears to have been fixed already.
> Man page: systemd.netdev.5
> Issue: Onboard → On-board (as in previous string)
Updated.
> Man page: systemd.network.5
> Issue: B<systemd-networkd> -> B<systemd-networkd>(8)
First reference does this, subsequent do not.
> Man page: systemd.network.5
> Issue: B<netlabelctl> → B<netlabelctl>(8)
First reference does this, subsequent do not.
> Man page: systemd.network.5
> Issue: Missing verb (aquired? configured?) in the half sentence starting with "or by a "
I dropped the comma.
> Man page: systemd-nspawn.1
> Issue: All host users outside of that range → All other host users
Reworded.
> # FIXME no effect → no effect\\&.
> #. type: Plain text
> #: archlinux debian-unstable fedora-rawhide mageia-cauldron opensuse-tumbleweed
> msgid ""
> "Whichever ID mapping option is used, the same mapping will be used for users "
> "and groups IDs\\&. If B<rootidmap> is used, the group owning the bind "
> "mounted directory will have no effect"
A period is added. Not sure if there's some other issue.
> Man page: systemd-oomd.service.8
> Issue: B<systemd> → B<systemd>(1)
Done.
> Man page: systemd.path.5
> Issue 1: B<systemd.exec>(1) → B<systemd.exec>(5)
> Issue 2: This section does not (yet?) exist
Fixed.
> Man page: systemd-pcrphase.service.8
> Issue 1: indicate phases into TPM2 PCR 11 ??
> Issue 2: Colon at the end of the paragraph?
Fixed.
> Man page: systemd-pcrphase.service.8
> Issue: final boot phase → final shutdown phase?
Updated.
> Man page: systemd-pcrphase.service.8
> Issue: for the the → for the
Fixed tree-wide.
> Man page: systemd-portabled.service.8
> Issue: In systemd-portabled.service(8): Portable Services Documentation
Updated.
> Man page: systemd-pstore.service.8
> Issue: Here and the following paragraphs: . → \\&. // Upstream: What does this comment mean? // You normally write \\&. for a full dot (full stop etc.); here you write only "." (i.e. a plain dot).
>
> "and we look up \"localhost\", nss-dns will send the following queries to "
> "systemd-resolved listening on 127.0.0.53:53: first \"localhost.foobar.com\", "
> "then \"localhost.barbar.com\", and finally \"localhost\". If (hopefully) the "
> "first two queries fail, systemd-resolved will synthesize an answer for the "
> "third query."
Looks all OK to me.
> Man page: systemd.resource-control.5
> Issue: Missing closing bracket after link to Control Groups version 1
Fixed.
> Man page: systemd-sysext.8
> Issue: In systemd-portabled.service(8): Portable Services Documentation
Updated.
> Man page: systemd.timer.5
> Issue 1: B<systemd.exec>(1) → B<systemd.exec>(5)
> Issue 2: This section does not (yet?) exist
Fixed.
> Man page: systemd.unit.5
> Issue: that is → that are
Fixed.
> Man page: systemd-veritysetup-generator.8
> Issue: systemd-veritysetup-generator → B<systemd-veritysetup-generator>
>
> "systemd-veritysetup-generator implements B<systemd.generator>(7)\\&."
>
> "systemd-veritysetup-generator understands the following kernel command line "
> "parameters:"
Updated.
> Man page: systemd-volatile-root.service.8
> Issue: initrdyes → Initrd
Fixed.
> Man page: sysupdate.d.5
> Issue: : → \\&. (As above in TRANSFER)
Updated.
> Man page: sysupdate.d.5
> Issue: some → certain
Updated.
> Man page: sysupdate.d.5
> Issue 1: i\\&.e\\& → I\\&.e\\&
Fixed.
> Issue 2: the image → the system
"image" seems correct.
> Man page: tmpfiles.d.5
> Issue: systemd-tmpfiles → B<systemd-tmpfiles>(8)
Updated.
This renames systemd-boot-system-token.service to
systemd-boot-random-seed.service and conditions it less strictly.
Previously, the job of the service was to write a "system token" EFI
variable if it was missing. It called "bootctl --graceful random-seed"
for that. With this change we condition it more liberally: instead of
calling it only when the "system token" EFI variable isn't set, we call
it whenever a boot loader interface compatible boot loader is used. This
means, previously it was invoked on the first boot only: now it is
invoked at every boot.
This doesn#t change the command that is invoked. That's because
previously already the "bootctl --graceful random-seed" did two things:
set the system token if not set yet *and* refresh the random seed in the
ESP. Previousy we put the focus on the former, now we shift the focus to
the latter.
With this simple change we can replace the logic
f913c784ad added, but from a service that
can run much later and doesn't keep the ESP pinned.
Rather than passing seeds up to userspace via EFI variables, pass seeds
directly to the kernel's EFI stub loader, via LINUX_EFI_RANDOM_SEED_TABLE_GUID.
EFI variables can potentially leak and suffer from forward secrecy
issues, and processing these with userspace means that they are
initialized much too late in boot to be useful. In contrast,
LINUX_EFI_RANDOM_SEED_TABLE_GUID uses EFI configuration tables, and so
is hidden from userspace entirely, and is parsed extremely early on by
the kernel, so that every single call to get_random_bytes() by the
kernel is seeded.
In order to do this properly, we use a bit more robust hashing scheme,
and make sure that each input is properly memzeroed out after use. The
scheme is:
key = HASH(LABEL || sizeof(input1) || input1 || ... || sizeof(inputN) || inputN)
new_disk_seed = HASH(key || 0)
seed_for_linux = HASH(key || 1)
The various inputs are:
- LINUX_EFI_RANDOM_SEED_TABLE_GUID from prior bootloaders
- 256 bits of seed from EFI's RNG
- The (immutable) system token, from its EFI variable
- The prior on-disk seed
- The UEFI monotonic counter
- A timestamp
This also adjusts the secure boot semantics, so that the operation is
only aborted if it's not possible to get random bytes from EFI's RNG or
a prior boot stage. With the proper hashing scheme, this should make
boot seeds safe even on secure boot.
There is currently a bug in Linux's EFI stub in which if the EFI stub
manages to generate random bytes on its own using EFI's RNG, it will
ignore what the bootloader passes. That's annoying, but it means that
either way, via systemd-boot or via EFI stub's mechanism, the RNG *does*
get initialized in a good safe way. And this bug is now fixed in the
efi.git tree, and will hopefully be backported to older kernels.
As the kernel recommends, the resultant seeds are 256 bits and are
allocated using pool memory of type EfiACPIReclaimMemory, so that it
gets freed at the right moment in boot.
In many places we spelled out the phrase behind "initrd" in full, but this
isn't terribly useful. In fact, no "RAM disk" is used, so emphasizing this
is just confusing to the reader. Let's just say "initrd" everywhere, people
understand what this refers to, and that it's in fact an initramfs image.
Also, s/i.e./e.g./ where appropriate.
Also, don't say "in RAM", when in fact it's virtual memory, whose pages
may or may not be loaded in page frames in RAM, and we have no control over
this.
Also, add <filename></filename> and other minor cleanups.
Adding Microsoft keys by default is recommended because firmware drivers
might be signed by it.
This also changes the file ending from .esl to .auth as that is used by
sign-efi-sig-list manpage and other sources.
***DANGER*** NOTE ***DANGER***
This feature might result in your device becoming soft-brick as outlined
below, please use this feature carefully.
***DANGER*** NOTE ***DANGER***
If secure-boot-enrollment is set to no, then no action whatsoever is performed,
no matter the files on the ESP.
If secure boot keys are found under $ESP/loader/keys and secure-boot-enrollment
is set to either manual or force then sd-boot will generate enrollment entries
named after the directories they are in. The entries are shown at the very bottom
of the list and can be selected by the user from the menu. If the user selects it,
the user is shown a screen allowing for cancellation before a timeout. The enrollment
proceeds if the action is not cancelled after the timeout.
Additionally, if the secure-boot-enroll option is set to 'force' then the keys
located in the directory named 'auto' are going to be enrolled automatically. The user
is still going to be shown a screen allowing them to cancel the action if they want to,
however the enrollment will proceed automatically after a timeout without
user cancellation.
After keys are enrolled, the system reboots with secure boot enabled therefore, it is
***critical*** to ensure that everything needed for the system to boot is signed
properly (sd-boot itself, kernel, initramfs, PCI option ROMs).
This feature currently only allows loading the most simple set of variables: PK, KEK
and db.
The files need to be prepared with cert-to-efi-sig-list and then signed with
sign-efi-sig-list.
Here is a short example to generate your own keys and the right files for
auto-enrollement.
`
keys="PK KEK DB"
uuid="{$(systemd-id128 new -u)}"
for key in ${keys}; do
openssl req -new -x509 -subj "/CN=${key}/ -keyout "${key}.key" -out "${key}.crt"
openssl x509 -outform DER -in "${key}.crt" -out "${key}.cer"
cert-to-efi-sig-list -g "${uuid}" "${key}.crt" "${key}.esl.nosign"
done
sign-efi-sig-list -c PK.crt -k PK.key PK PK.esl.nosign PK.esl
sign-efi-sig-list -c PK.crt -k PK.key KEK KEK.esl.nosign KEK.esl
sign-efi-sig-list -c KEK.crt -k KEK.key db db.esl.nosign db.esl
`
Once these keys are enrolled, all the files needed for boot ***NEED*** to be signed in
order to run. You can sign the binaries with the sbsign tool, for example:
`
sbsign --key db.key --cert db.crt bzImage --output $ESP/bzImage
`
Example:
Assuming the system has been put in Setup Mode:
`
$ESP/loader/keys/auto/db.esl
$ESP/loader/keys/auto/KEK.esl
$ESP/loader/keys/auto/PK.esl
$ESP/loader/keys/Linux Only/db.esl
$ESP/loader/keys/Linux Only/KEK.esl
$ESP/loader/keys/Linux Only/PK.esl
$ESP/loader/keys/Linux and Windows/db.esl
$ESP/loader/keys/Linux and Windows/KEK.esl
$ESP/loader/keys/Linux and Windows/PK.esl
`
If auto-enroll is set, then the db, KEK and then PK are enrolled from the 'auto'
directory.
If not, three new boot entries are available to the user in order to enroll either the
'Linux Only', 'Linux And Windows' or 'auto' set of keys.
Lennart Poettering
Luca Boccassi
r-vdp
Luca Boccassi
Zbigniew Jędrzejewski-Szmek
Colin Walters
Lennart Poettering
Felix Pehla
Igor Opaniuk
Jan Engelhardt
Yu Watanabe
Gerd Hoffmann
Daan De Meyer
David Tardon
Emil Velikov
Abderrahim Kitouni
Jan Janssen
igo95862
Jason A. Donenfeld
Vincent Dagonneau