The LLDP spec (IEEE 802.1AB) requires the three mandatory TLVs (Chassis
ID, Port ID, and TTL) to be the first three TLVs in the packet, in that
specific order, whereas systemd put the TTL near the end of the packet.
This violation caused the ethernet switch in our office to discard these
packets as malformed, and Wireshark's packet parser also chokes on them.
```
timedatectl list-timezones --no-pager
...
==164329==ERROR: LeakSanitizer: detected memory leaks
Direct leak of 8192 byte(s) in 1 object(s) allocated from:
#0 0x7fe8a74b6f8c in reallocarray (/lib64/libasan.so.6+0xaef8c)
#1 0x7fe8a63485dc in strv_push ../src/basic/strv.c:419
#2 0x7fe8a6349419 in strv_consume ../src/basic/strv.c:490
#3 0x7fe8a634958d in strv_extend ../src/basic/strv.c:542
#4 0x7fe8a643d787 in bus_message_read_strv_extend ../src/libsystemd/sd-bus/bus-message.c:5606
#5 0x7fe8a643db9d in sd_bus_message_read_strv ../src/libsystemd/sd-bus/bus-message.c:5628
#6 0x4085fb in list_timezones ../src/timedate/timedatectl.c:314
#7 0x7fe8a61ef3e1 in dispatch_verb ../src/shared/verbs.c:103
#8 0x410f91 in timedatectl_main ../src/timedate/timedatectl.c:1025
#9 0x41111c in run ../src/timedate/timedatectl.c:1043
#10 0x411242 in main ../src/timedate/timedatectl.c:1046
#11 0x7fe8a489df1f in __libc_start_call_main (/lib64/libc.so.6+0x40f1f)
```
No need to involve a trivial shell script for this.
We could call the compiler directly, but test() expects arguments
to be passed separately and cc.cmd_array() can contain arguments
itself. Using env is easier than manually slicing the array because
meson has no builtins for that.
Bash will generate a very nice message for us:
/tmp/ff.sh: line 1: SOMEVAR: parameter null or not set
Let's save some keystrokes by not replacing this with our own inferior
messages.
This is a follow-up for f470cb6d13 which in
turn is a follow-up for a068aceafb.
The latter started to honour hidden files when deciding whether a
directory is empty. The former reverted to the old behaviour to fix
issue #23220.
It introduced a bug though: when a directory contains a larger number of
hidden entries the getdents64() buffer will not suffice to read them,
since we just allocate three entries for it (which is definitely enough
if we just ignore the . + .. entries, but not ig we ignore more).
I think it's a bit confusing that dir_is_empty() can return true even if
rmdir() on the dir would return ENOTEMPTY. Hence, let's rework the
function to make it optional whether hidden files are ignored or not.
After all, I looking at the users of this function I am pretty sure in
more cases we want to honour hidden files.
We used both "qemu" and "QEMU", let's use the lower-case version everywhere
since it's also the name of the binary and the version that people are
most familiar with.
The stuff under test/ is not only for the integeration tests, but also
for various other test-related stuff, so adjust the docs a bit.
Those long indentifiers make test output very wide, and they are ultimately
not very useful for humans to look at. Let's use some short string to identify
the test failure instead.
Even if the device node is the same, devnum (thus, device ID) and
syspath may be different. If a 'remove' and 'add' events for the same
device node but with different devnum and syspath are queued,
previously, we might process them in parallel. And, udev_watch_end() for
the 'remove' event and udev_watch_begin() for the 'add' event may
interfere each other.
Previously, a device has DEVPATH_OLD is blocked by a previous event
whose devpath is equivalent to the DEVPATH_OLD.
This extends the condtion.
1. an event has DEVPATH_OLD is blocked by a previous event whose
devpath is a parent of, child of, or equivalent to the DEVPATH_OLD.
2. an event is blocked by a previous event whose DEVPATH_OLD is a
parent of, child of, or equivalent to the devpath of the new event.
I am not sure such check is really necessary. But, the cost of the check
is expected to be extremely small, as device renaming does not occur so
frequently. Hence, it should not introduce any significant performance
regression.
If two devices have the same devnum and subsystem (more specifically,
if the device is block or not), or have the same ifindex, then IDs of
these devices are equivalent.
Hence, the previous conditions are covered by comparing device IDs.
Of course, events with a same ID should be already blocked by the
devpath check. So, this should not change anything.
However, udevd saves many kinds of data under /run/udev named with
the device ID. If multiple workers processes events for the same device
ID, then the database may become corrupted.
Let's explicitly check the device IDs for safety and simplicity.
A compile time option is added to select behaviour: by default
UNIT_FILE_PRESET_ENABLE_ONLY is still used, but the intent is to change to
UNIT_FILE_PRESET_FULL at some point in the future. Distros that want to
opt-in can use the config option to change the behaviour.
(The option is just a boolean: it would be possible to make it multi-valued,
and allow full, enable-only, disable-only, none. But so far nobody has asked
for this, and it's better not to complicate things needlessly.)
With the configuration option flipped, instead of only doing enablements,
perform a full preset on first boot. The reason is that although
`/etc/machine-id` might be missing, there may be other files provisioned in
`/etc` (in fact, this use case is mentioned in `log_execution_mode`). Some of
those possible files include enablement symlinks even if presets dictate it
should be disabled.
Such a seemingly contradictory situation occurs in {RHEL,Fedora} CoreOS,
where we ship `/etc` as if `preset-all` were called. However, we want to
allow users to disable default-enabled services via Ignition, which does
this by creating preset dropins before switchroot. (For why we do
`preset-all` at compose time, see:
https://github.com/coreos/fedora-coreos-config/pull/77).
For example, the composed FCOS image has a `enable zincati.service`
preset and an enablement for that in `/etc`, while at boot time when we
switch root, there may be a `disable zincati.service` preset with higher
precedence. In that case, we want systemd to disable the service.
This is essentially a revert of 304b3079a2. It seems like systemd
*used* to do this, but it was changed to try to make the container
workflow a bit faster.
Resolves: https://github.com/coreos/fedora-coreos-tracker/issues/392
Co-authored-by: Zbigniew Jędrzejewski-Szmek <zbyszek@in.waw.pl>
We have vendor presets, and local admin presets, and runtime presets
(under /usr/lib, /usr/local/lib and /etc, /run, respectively). When we
display preset state, it can be configured in any of those places, so
we shouldn't say anything about the origin.
(Another nice advantage is that it improves alignment:
[root@f36 ~]# systemctl list-unit-files multipathd.service
UNIT FILE STATE VENDOR PRESET
multipathd.service enabled enabled
^ this looks we have a "PRESET" column that is empty.)
In sd_network_monitor_flush(), we shouldn't remove the inotify
watch for the current directory if the directory the network
monitor is waiting for wasn't created yet.
inotify_add_watch() returns the same unique watch descriptor if a
path is already being watched. Let's return the watch descriptor
from monitor_add_inotify_watch() so we can check if it's the same
as the watch descriptor of the inotify event. If they are equal,
we're still watching the same path and we don't need to remove the
inotify watch just yet.
Many distributions ship systemd-networkd as a separate file so we
need to be able to ship the tmpfiles networkd entries as part of
that separate networkd package. Let's split the networkd entries
into a separate file to make that possible.
It doesn't really care about the hash value passed (which is processed
by systemd-veritysetup-generator), but it does care about the fact that
it is set (and mounts the DM nodes /dev/mapper/usr + /dev/mapper/root in
that case).
Zbigniew Jędrzejewski-Szmek
Lennart Poettering
Sonali Srivastava
Evgeny Vereshchagin
Daan De Meyer
Matthijs van Duin
Yu Watanabe
Jan Janssen
Jonathan LebonandZbigniew Jędrzejewski-Szmek
rodin-ia
dependabot[bot]