Add Router Advertisement DNS Search List option as specified
in RFC 8106. The search list option uses and identical option
header as the RDNSS option and therefore the option header
structure can be reused.
If systemd is compiled with IDNA support, internationalization
of the provided search domain is applied, after which the search
list is written in wire format into the DNSSL option.
An infiniband hardware address is 20 bytes, but sockaddr_ll.sll_addr is only 8
bytes. Explicitly ensure that sockaddr_union has enough space for infiniband
addresses, even if they run over sockaddr_ll and add a macro to compute the
proper size to pass to kernel.
As a follow-up for db3f45e2d2 let's do the
same for all other cases where we create a FILE* with local scope and
know that no other threads hence can have access to it.
For most cases this shouldn't change much really, but this should speed
dbus introspection and calender time formatting up a bit.
In normal operation this would trigger an assertion
when a DHCP server is configured every time the link goes up.
This change makes sd_dhcp_server_configure_pool idempotent
and stops the DHCP server when the link loses carrier.
In addition to this stopping the assertion being triggered,
this has the useful side-effect of allowing the link to be taken down
and then brought back up as a way to have it use DNS from an "upstream"
interface that got its DNS configuration via DHCP
after the downstream link was configured.
Test ICMPv6 Router Solicitation exponential backoff timer by
computing the minimum and maximum values according to RFC 7559,
Section 2 and the algorithm itself described in RFC 3315, Section
14. Reset the sd_ndisc timer to trigger after a zero second delay,
which causes the ndisc timeout to be triggered immediately once
the caller of the "sending" function returns to the main loop.
Move ICMPv6 Router Solicitation sending after timer computation so
that timers are already set up when the packet is being sent. This
makes it possible to create a test that inspects Router
Solicitation timer values when the Router Solicitation is sent out
on the network.
Instead of sending a fixed amount of Router Solicitiations, implement
the backoff algorithm proposed in RFC 7559. The backoff algorithm is
the same as used by DHCPv6.
Time out after 12s as specified in RFC 4861 in order not to delay
setting up a link for too long while sending Router Solicitations
in the background. Notice that after this change the callback will
receive a SD_NDISC_EVENT_TIMEOUT timeout event, and at a later point
when a router appears, a received Router Advertisment will cause the
callback to be called again with the SD_NDISC_EVENT_ROUTER event.
Let's downgrade the warning introduced by
955d99edc7 to debug, as we really
shouldn't log at more than debug level from library code.
(And while we are at it, print the MTU as the right (unsigned) type in
the format string.)
All those uses were correct, but I think it's better to be explicit.
Using implicit errno is too error prone, and with this change we can require
(in the sense of a style guideline) that the code is always specified.
Helpful query: git grep -n -P 'log_[^s][a-z]+\(.*%m'
Add tests for prefix creation, router variable setting and finally
verify that a Router Advertisement is properly formatted when sending.
Also check that there is a Router Advertisment with zero lifetime
when Router Advertisement sending is stopped.
Receive Router Solicitations and send a unicast Router Advertisment
in response. Refactor ICMPv6 packet handling code so that the common
ICMPv6 validation parts are reused between the existing router
discovery and the new functionality adding reception of Router
Solicitation messages.
Create and remove the ICMPv6 Router Advertisement socket file
descriptor and implement Router Advertisment sending. As not
all options are mandatory, use IO vectors to point to the included
options and the prefix information.
Reuse and refactor the functionality already present for Router
Solicitations in order to create a socket for sending Router
Advertisements. Anticipate reception of incoming Router
Solicitations by setting the ICMPv6 filter accordingly. Also set
the unicast hop limit to 255 for ICMPv6 sockets as unicast Router
Advertisments are to be sent in response to Router Solicitations.
Update the Router Solicitation test case code with a function
definition in order to keep the test case working.
Router Advertisements are sent uniformly distributed between a
minimum and maximum time according to RFC 4861, Section 6.2.4.
Default values from RFC 4861 are for now used as minimum and
maximum Router Advertisement timeouts.
When stopping, a Router Advertisement with a router lifetime set
to zero is sent in order to inform any nodes that the interface
on this host no longer is a router.
Define Router Advertisement prefix structure. Add the Prefix
Information ICMPv6 option defined in RFC 4861 to the prefix
information structure, as it will simplify sending a Prefix
Information option later on. In order to handle endianness
correctly, the structure is redefined here instead of using
the one in netinet/icmp6.h.
Add functions to create and modify prefix information and set
default values as defined in RFC 4861, Section 6.2.1.
This adds a modified version of dhcp6_option_parse_domainname() that is
able to parse compressed domain names, borrowing the idea from
dns_packet_read_name(). It also adds pieces in networkd-link and
networkd-manager to properly save/load the added option field.
Resolves#2710.
Reset also the counter for number of Router Solicitations sent when
the associated file descriptor is closed and the event source
unreferenced. With this change the router discovery can now be
stopped and restarted arbitrary many times.
The indentation for emacs'es meson-mode is added .dir-locals.
All files are reindented automatically, using the lasest meson-mode from git.
Indentation should now be fairly consistent.
It's crucial that we can build systemd using VS2010!
... er, wait, no, that's not the official reason. We need to shed old systems
by requring python 3! Oh, no, it's something else. Maybe we need to throw out
345 years of knowlege accumulated in autotools? Whatever, this new thing is
cool and shiny, let's use it.
This is not complete, I'm throwing it out here for your amusement and critique.
- rules for sd-boot are missing. Those might be quite complicated.
- rules for tests are missing too. Those are probably quite simple and
repetitive, but there's lots of them.
- it's likely that I didn't get all the conditions right, I only tested "full"
compilation where most deps are provided and nothing is disabled.
- busname.target and all .busname units are skipped on purpose.
Otherwise, installation into $DESTDIR has the same list of files and the
autoconf install, except for .la files.
It'd be great if people had a careful look at all the library linking options.
I added stuff until things compiled, and in the end there's much less linking
then in the old system. But it seems that there's still a lot of unnecessary
deps.
meson has a `shared_module` statement, which sounds like something appropriate
for our nss and pam modules. Unfortunately, I couldn't get it to work. For the
nss modules, we need an .so version of '2', but `shared_module` disallows the
version argument. For the pam module, it also didn't work, I forgot the reason.
The handling of .m4 and .in and .m4.in files is rather awkward. It's likely
that this could be simplified. If make support is ever dropped, I think it'd
make sense to switch to a different templating system so that two different
languages and not required, which would make everything simpler yet.
v2:
- use get_pkgconfig_variable
- use sh not bash
- use add_project_arguments
v3:
- drop required:true and fix progs/prog typo
v4:
- use find_library('bz2')
- add TTY_GID definition
- define __SANE_USERSPACE_TYPES__
- use join_paths(prefix, ...) is used on all paths to make them all absolute
v5:
- replace all declare_dependency's with []
- add more conf.get guards around optional components
v6:
- drop -pipe, -Wall which are the default in meson
- use compiler.has_function() and compiler.has_header_symbol instead of the
hand-rolled checks.
- fix duplication in 'liblibsystemd' library name
- use the right .sym file for pam_systemd
- rename 'compiler' to 'cc': shorter, and more idiomatic.
v7:
- use ENABLE_ENVIRONMENT_D not HAVE_ENVIRONMENT_D
- rename prefix to prefixdir, rootprefix to rootprefixdir
("prefix" is too common of a name and too easy to overwrite by mistake)
- wrap more stuff with conf.get('ENABLE...') == 1
- use rootprefix=='/' and rootbindir as install_dir, to fix paths under
split-usr==true.
v8:
- use .split() also for src/coredump. Now everything is consistent ;)
- add rootlibdir option and use it on the libraries that require it
v9:
- indentation
v10:
- fix check for qrencode and libaudit
v11:
- unify handling of executable paths, provide options for all progs
This makes the meson build behave slightly differently than the
autoconf-based one, because we always first try to find the executable in the
filesystem, and fall back to the default. I think different handling of
loadkeys, setfont, and telinit was just a historical accident.
In addition to checking in $PATH, also check /usr/sbin/, /sbin for programs.
In Fedora $PATH includes /usr/sbin, (and /sbin is is a symlink to /usr/sbin),
but in Debian, those directories are not included in the path.
C.f. https://github.com/mesonbuild/meson/issues/1576.
- call all the options 'xxx-path' for clarity.
- sort man/rules/meson.build properly so it's stable
After an ipv4ll claimed address conflict occurs a new address needs
to be chosen and then the acquisition state machine needs to be
restarted.
This commit adds a function (sd_ipv4ll_restart) that clears the
previously acquired address (ll->address) and then calls the existing
sd_ipv4ll_start function to choose the new address and start the
acquisition.
Signed-off-by: Jason Reeder <jasonreeder@gmail.com>
A bug exists where the conflict counter is cleared
regardless of whether or not the next probe attempt leads to
a successful address acquisition. This causes 'bursts' of
MAX_CONFLICTS probes followed by a delay of
RATE_LIMIT_INTERVAL instead of a single probe each
RATE_LIMIT_INTERVAL when beyond MAX_CONFLICTS.
The conflict counter should only be cleared after an
address is successfully acquired. This commit achieves that
goal.
From RFC3927:
A host should maintain a counter of the number of address
conflicts it has experienced in the process of trying to
acquire an address, and if the number of conflicts exceeds
MAX_CONFLICTS then the host MUST limit the rate at which it
probes for new addresses to no more than one new address per
RATE_LIMIT_INTERVAL. This is to prevent catastrophic ARP
storms in pathological failure cases, such as a rogue host
that answers all ARP probes, causing legitimate hosts to go
into an infinite loop attempting to select a usable address.
Signed-off-by: Jason Reeder <jasonreeder@gmail.com>
Patrik Flykt
Lennart Poettering
juga0
bengal
Zbigniew Jędrzejewski-Szmek
hecke
Richard Maw
Matthias Greiner
Daniel Wang
Dimitri John Ledkov
Jason Reeder
Matija Skala
AsciiWolf
Alexander Galanin