We'd start writing an entry line, then another one, then another one,
and then output the rest of the first one, and then some other random
stuff, and the rest of some other lines... Results were ...eh... random.
Let's define a helper to avoid some of the copy&paste madness, and separate
blocks that output a single line with /**********************************/.
This rework doesn't change what data is written, it only tries to fix the
format of the output. The fact that some entries only write data from
link->network, and some from either link->network or link, some stuff only
for dhpc4 leases while some for both dhpc4 and dhcp6, etc, looks rather
suspicious too, but I didn't touch this.
Whenever we pick up a new line in /proc/self/mountinfo and want to
synthesize a new mount unit from it, let's say which one it is.
Moreover, downgrade the log message when we encounter a mount point with
an overly long name to LOG_WARNING, since it's generally fine to ignore
such mount points.
Also, attach a catalog entry to explain the situation further.
Prompted-By: #15221
Let's be more thorough that whenever we build a unit name based on
parameters, that the result is actually a valid user name. If it isn't
fail early.
This should allows us to catch various issues earlier, in particular
when we synthesize mount units from /proc/self/mountinfo: instead of
actually attempting to allocate a mount unit we will fail much earlier
when we build the name to synthesize the unit under. Failing early is a
good thing generally.
We would print the error sometimes to stdout and sometimes to stderr. It *is*
useful to get the message if one of the names is not found on the bus to
stdout, so that this shows out in the pager. So let's do verification of args
early to catch invalid arguments, and then if we receive an error over the bus
(most likely that the name is not activatable), let's print to stdout so it
gets paged. E.g. 'busctl tree org.freedesktop.systemd1 org.freedesktop.systemd2'
gives a nicely usable output.
Users might want to use that to unset a previous setting. The docs seem OK as
they are: we don't need to explictly mention the empty value, since it is
almost always allowed.
Those fields are both uint32_t, so we should use the same type when parsing.
Having a different type didn't change the result, but let's be consistent.
Each of bus_set_address_{user,system} had two users, and each of the two users
would set the internal flag manually. We should do that internally in the
functions instead.
While at it, only set the flag when setting the address is actually successful.
This doesn't change anything for current users, but it seems more correct.
Those are fairly trivial to reimplement, but any non-trivial user of sd-bus
is likely to need them. So let's expose them to save everyone the trouble.
I'm keeping the internal functions and making the public ones thin wrappers,
because for the internal uses we don't need the additional asserts, and also we
can't expose _pure_ annotation easily, and dropping it would likely make the
compiled code a bit less efficient.
homed maintains two or three copies of the user's identity record per
home directory: one on the host, one inside the LUKS header, and one
embedded in the home directory.
Previously we'd insist that if a user logs in they have to authenticate
against all three, as a safety feature. This broke logging into
unfixated records however, since in that case the host version is
synthetic and thus does not carry any authentication data.
Let's hence losen the strictness here: accept authentication against
host records that carry no auth data. This should be safe as we know
after all that the second/third record will catch invalid accesses.
Fixes: #15178
Defines how link-local and autoconf addresses are generated.
0: generate address based on EUI64 (default)
1: do no generate a link-local address, use EUI64 for addresses generated
from autoconf
2: generate stable privacy addresses, using the secret from
stable_secret (RFC7217)
3: generate stable privacy addresses, using a random secret if unset
Units created with "systemctl edit --full" from generator units aren't
removed with "systemctl revert" because units in the generator,
generator_early, and generator_late paths aren't considered vendor
units.
Alter path_is_vendor() to return true if the given path is a
generator unit, which in turn causes "systemctl revert" to remove units
created with "systemctl edit --full" as they now have vendor versions.
Fixes#10053
ATA devices should use the ATA ids like port number and (possibly)
master/slave or multiplier id, not the generic SCSI ID.
Currently only port number is included in the link. With this patch
the link would be able to support more cases, which are a) when the
device is behind a port multiplexer b) the distinction between master
and slave (distinguished by target id).
I tried to verify scenario a) with this patch, but I failed to find a
machine with PMP SATA devices attached. But the link below
https://github.com/systemd/systemd/issues/3943
could show what's the difference. Here is my test for scenario b)
Current version:
linux-ql21:~ # ll /sys/class/block/sd[ab]
lrwxrwxrwx 1 root root 0 May 8 20:46 /sys/class/block/sda ->
../../devices/pci0000:00/0000:00:01.1/ata4/host3/target3:0:0/3:0:0:0/block/sda
lrwxrwxrwx 1 root root 0 May 8 20:46 /sys/class/block/sdb ->
../../devices/pci0000:00/0000:00:01.1/ata4/host3/target3:0:1/3:0:1:0/block/sdb
linux-ql21:~ # ll /dev/disk/by-path/pci-0000\:00\:01.1-ata-1
lrwxrwxrwx 1 root root 9 May 8 20:44
/dev/disk/by-path/pci-0000:00:01.1-ata-1 -> ../../sdb
linux-ql21:~ # udevadm info /sys/class/block/sda |grep by-path
S: disk/by-path/pci-0000:00:01.1-ata-1
E: DEVLINKS=/dev/disk/by-id/ata-VBOX_HARDDISK_VB3649e885-3e0cdd64
/dev/disk/by-id/scsi-0ATA_VBOX_HARDDISK_VB3649e885-3e0cdd64
/dev/disk/by-id/scsi-1ATA_VBOX_HARDDISK_VB3649e885-3e0cdd64
/dev/disk/by-path/pci-0000:00:01.1-ata-1
/dev/disk/by-id/scsi-SATA_VBOX_HARDDISK_VB3649e885-3e0cdd64
linux-ql21:~ # udevadm info /sys/class/block/sdb |grep by-path
S: disk/by-path/pci-0000:00:01.1-ata-1
E: DEVLINKS=/dev/disk/by-id/ata-VBOX_HARDDISK_VBc53b2498-d84ae8de
/dev/disk/by-id/scsi-SATA_VBOX_HARDDISK_VBc53b2498-d84ae8de
/dev/disk/by-id/scsi-1ATA_VBOX_HARDDISK_VBc53b2498-d84ae8de
/dev/disk/by-id/scsi-0ATA_VBOX_HARDDISK_VBc53b2498-d84ae8de
/dev/disk/by-path/pci-0000:00:01.1-ata-1
After patch applied:
linux-ql21:~ # ll /sys/class/block/sd[ab]
lrwxrwxrwx 1 root root 0 May 8 21:07 /sys/class/block/sda ->
../../devices/pci0000:00/0000:00:01.1/ata4/host3/target3:0:0/3:0:0:0/block/sda
lrwxrwxrwx 1 root root 0 May 8 21:07 /sys/class/block/sdb ->
../../devices/pci0000:00/0000:00:01.1/ata4/host3/target3:0:1/3:0:1:0/block/sdb
linux-ql21:~ # ll /dev/disk/by-path/pci-0000\:00\:01.1-ata-*
lrwxrwxrwx 1 root root 9 May 8 21:07
/dev/disk/by-path/pci-0000:00:01.1-ata-1.0 -> ../../sda
lrwxrwxrwx 1 root root 9 May 8 21:07
/dev/disk/by-path/pci-0000:00:01.1-ata-1.1 -> ../../sdb
linux-ql21:~ # udevadm info /sys/class/block/sda |grep by-path
S: disk/by-path/pci-0000:00:01.1-ata-1.0
E: DEVLINKS=/dev/disk/by-id/scsi-1ATA_VBOX_HARDDISK_VB3649e885-3e0cdd64
/dev/disk/by-id/scsi-0ATA_VBOX_HARDDISK_VB3649e885-3e0cdd64
/dev/disk/by-id/ata-VBOX_HARDDISK_VB3649e885-3e0cdd64
/dev/disk/by-path/pci-0000:00:01.1-ata-1.0
/dev/disk/by-id/scsi-SATA_VBOX_HARDDISK_VB3649e885-3e0cdd64
linux-ql21:~ # udevadm info /sys/class/block/sdb |grep by-path
S: disk/by-path/pci-0000:00:01.1-ata-1.1
E: DEVLINKS=/dev/disk/by-id/scsi-0ATA_VBOX_HARDDISK_VBc53b2498-d84ae8de
/dev/disk/by-id/ata-VBOX_HARDDISK_VBc53b2498-d84ae8de
/dev/disk/by-id/scsi-1ATA_VBOX_HARDDISK_VBc53b2498-d84ae8de
/dev/disk/by-id/scsi-SATA_VBOX_HARDDISK_VBc53b2498-d84ae8de
/dev/disk/by-path/pci-0000:00:01.1-ata-1.1
Changelog:
v5: add another parameter compat_link in handle_scsi()
v4: comment for ID_PATH_ATA_COMPAT
get string length with pointer difference
(suggested by Franck Bui<fbui@suse.com>)
v3: creating compatible link from env
variables type change
v2: remove udev rules modification for compatible link
setup a test scenario of master/slave ATA devices
v1: initial patch
