When receiving one or more prefixes with variable length, assign a
64 bit long prefix for each link that has been configured for DHCPv6
prefix delegation and is not using DHCPv6 to fetch IPv6 adresses.
Keep assigning prefixes with length 64 from each prefix received via
DHCPv6 as long as there are prefixes left. If the number of prefixes
available from a prefix received via DHCPv6 is smaller than the
number of links, continue with the next delegated prefix, if any.
Remember the prefixes used for each link by storing them in a hash
and checking the hash each time a prefix is to be delegated. If an
error occurs when assigning a prefix to a link, try assigning the
prefix to another link. If the error occurs while updating the
prefix, log the situation and continue delegating the rest of the
prefixes.
Add a hashmap to the Manager struct that stores the association
between an IPv6 prefix and the network Link it is assigned to.
This is added in order to keep assigning the same prefixes with
the same links even though they are delegated at different times
or by different DHCPv6 clients.
As DHCPv6 leases may expire at some point, the delegated prefixes
have to be removed. Add a prefix removal function to the Router
Advertisement handling code.
Add a boolean that indicates whether the prefixes will always exist
or if they will time out after the assigned valid lifetime. In the
latter case calculate the expiry times for both preferred and valid
lifetimes for the prefixes, and decrease the remaining lifetimes
each time when a Router Advertisement is sent.
Should the prefix be updated, re-calculate the prefix lifetime. When
updating, update the existing entry, if any, with the lifetimes of
the added entry as the existing entry has its lifetimes set
according to its previously calculated expiry times.
Compute one set of minimum lifetimes for T1 and T2, i.e. the smaller
ones assigned to IA NA and IA PD. The lifetimes should be the same,
see RFC 7550 for details.
Request prefixes via DHCPv6 if there are networks that are
configured to distribute them. As specified in RFC 3633, a DHCPv6
client cannot redistribute the prefixes via Router Advertisements
on the same link. Ignore such networks, and print out a warning if
the link where DHCPv6 is enabled tries to do so.
Parse IA PD options and the prefixes in one or more PD Prefix
options. As the PD option contains identical data as the IA NA
option, re-use the same general data structures and sub-option
parsing logic. Similar to IA NA addresses, PD and associated
prefixes are stored in the address list of the IA PD lease.
An IA sub-option Status code will affect the IA NA and IA PD
option in question and cause those options to be ignored. A
Status code option in an IA Address or IA PD Prefix option
affects only that IA Address or Prefix.
Factor out IA Address option parsing and fix it so that all conditions
are checked before a new address is allocated and added to the address
list. Note also that the IA Address option can contain a nested Status
option. If the status in anything else than zero, the DHCPv6 server is
communicating an error condition and the address cannot be used.
Status option nesting is clarified in RFC 7550, Section 4.1.
The IA Address option is included as a typedef so that the lifetimes
can be inspected before allocating a new address and the option length
needed is easily available.
Sanitize code for parsing DHCPv6 IA NA and TA options and their
nested Status options so that the options can be fully and
properly ignored should they not be conformant to the specification.
Do this by defining a proper DHCP6Option structure and sending that
structure to the parsing function. The parsing function will then
not manipulate either any option data pointers or their lengths in
order to iterate over the current option. Needless to say, this
affects a few files including the test program.
The Network section IPv6PrefixDelegation= option takes two new
configuration values, namely "static" and "dhcpv6" in addition
to boolean yes and no values. Static prefixes in IPv6Prefix
sections are used when IPv6PrefixDelegation= option contains
"static", and DHCPv6 is queried for prefixes when the option
contains "dhcpv6". Both DHCPv6 and static prefixes are used when
the option contains a boolean true value. The default value is
false as before, meaning no prefixes are delegated.
I'm not sure why this is needed, but apparrently coverity doesn't like
(void)0. With this change, coverity can (almost) build systemd:
CFLAGS='-D_Float128="long double"' meson cov-build -Dman=false && \
CCACHE_DISABLE=1 COVERITY_UNSUPPORTED=1 cov-build --dir cov-int ninja -C cov-build
Patch originially by Marek Cermak <macermak@redhat.com>.
If read_line() returns ENOBFUS this means the line was overly long. When
we use this for checking whether an executable is a script, then this
shouldn't be propagated as-is, but simply as "this is not a script".
This tweaks write_string_stream_ts() in one minor way: when stdio
buffering has been turned off, let's append the newline we shall append
to the buffer we write ourselves so that the kernel only gets one
syscall for the result. When buffering is enabled stdio will take care
of that anyway.
Follow-up for #7750.
We use the same check at two places, let's add a tiny helper function
for it, since it's not entirely trivialy, and we changes this before
multiple times, and it's a good thing if we can change it at one place
only instead of multiple.
Let's call getsockopt() in a loop, so that we can deal correctly with
the label changing while we are trying to read it.
(also, while we are at it, let's make sure that there's always one
trailing NUL byte at the end of the buffer, after all SO_PEERSEC has
zero documentation, and multiple implementing backends, hence let's
better be safe than sorry)
Also, drop UID/GID validity checks from getpeercred() as the kernel will
never pass us invalid UID/GID on userns, but the overflow UID/GID
instead. Add a comment about this.
This ensures that in all threads we fork off in the background in our
code we mask out all signals, so that our thread won't end up getting
signals delivered the main process should be getting.
We always set the signal mask before forking off the thread, so that the
thread has the right mask set from its earliest existance on.
We maintain static process-wide variables in these subsystems without
locking, hence let's refuse operation unless we are called from the main
thread (which we do anyway) just as a safety precaution.
When we check the exit status of a subprocess, let's compare it with
EXIT_SUCCESS rather than 0 when looking for success.
This clarifies in code what kind of variable we are looking at and what
we are doing.
Using wait_for_terminate_and_check() instead of wait_for_terminate()
let's us simplify, shorten and unify the return value checking and
logging of waitid(). Hence, let's use it all over the place.
This new flag will cause safe_fork() to wait for the forked off child
before returning. This allows us to unify a number of cases where we
immediately wait on the forked off child, witout running any code in the
parent after the fork, and without direct interest in the precise exit
status of the process, except recgonizing EXIT_SUCCESS vs everything
else.
This renames wait_for_terminate_and_warn() to
wait_for_terminate_and_check(), and adds a flags parameter, that
controls how much to log: there's one flag that means we log about
abnormal stuff, and another one that controls whether we log about
non-zero exit codes. Finally, there's a shortcut flag value for logging
in both cases, as that's what we usually use.
All callers are accordingly updated. At three occasions duplicate logging
is removed, i.e. where the old function was called but logged in the
caller, too.
Patrik Flykt
Lennart Poettering
Zbigniew Jędrzejewski-Szmek