We should not handle the ignore list as API mounts, as
systemd itself never touches them.
On Thu, Nov 11, 2010 at 10:34, Andreas Jaeger <aj@novell.com> wrote:
>
> I noticed for some time that systemd-remount-api-vfs is in the
> failed state and found now the following in the log files
>
> systemd-remount-api-vfs[467]: /bin/mount for /proc/bus/usb exited with exit status 32.
> systemd-remount-api-vfs[467]: mount: /proc/bus/usb not mounted already, or bad option
> systemd[1]: systemd-remount-api-vfs.service: main process exited, code=exited, status=1
> systemd[1]: Unit systemd-remount-api-vfs.service entered failed state.
At least Mandriva offers configuring characters to toggle
keyboard layout independently from main keymap. This functions
much the same as XkbOptions for X11 and actually is configured
together. The patch adds support for additional keymap,
KEYMAP_TOGGLE, to /etc/vconsole.conf, that is intended to be
used for the same purpose.
I've been playing recently with systemd on Arch, and had much fun. But
soon, alas, my fingers started to ache from repeatedly writing
systemctl restart some-long-service.service. So, I wrote a completion
script. I figured other people may want to use it, so I prepared a
patch against systemd-git (attached).
There are some notes/disclaimers, however:
- It requires bash>=4.0, sed, grep and awk. A bash-completion package
is not strictly needed; sourcing the file is enough.
- It wouldn't work properly with --session, as I had no way to test it.
- It uses the output of systemctl list-units directly when that's
enough, but also runs systemctl show when completing on some verbs
(for example, to check for AllowIsolate=yes). This /may/ be somewhat
slow once there are many units, since it calls a dbus method on each
one. Is there a faster way to have that information?
- The code is perhaps a bit long and messy; honestly, I blame the tool ;)
One way to improve on the situation is to integrate some completion
code in systemctl itself, the way e.g. gdbus, gsettings and django do
it. This will allow for finer grained and faster completions, and it
won't be necessary to keep the verb/option tables in sync with some
other file. But it does mean adding all of this code in C. If this is
acceptable, I'll try to have a go at it.
Finally, a couple of completion tips I run into:
- If you alias systemctl to, say, sctl, you get completions on that
too by running to following command:
complete -F _systemctl sctl
- Add the following line to your .inputrc, to have the completion show
after only a single tab press:
set show-all-if-ambiguous on
It makes the shell quite more pleasant.
Hope it's good enough!
Ran
Initial commit of a tmpfiles.d manpage.
I ran it through xmllint but I don't know how to make it look pretty
like the rest of the xml files. :-P
Signed-off-by: Brandon Philips <bphilips@suse.de>
The major benefit here, is that we get the ATAPI device serial
number. With SCSI ID we didn't get this since it's not part of the
SCSI INQUIRY command. Specifically this means that we get symlinks to
empty optical drives, e.g.
/dev/disk/by-id/ata-VBOX_CD-ROM_VB2-01700376
which we didn't get earlier. So this is a major win.
Also make ata_id work on CD-ROM devices when using /dev/bsg nodes so
this works on both the scsi_device as well as the block device. We do
this, basically, by issuing the ATA IDENTIFY PACKET DEVICE command
instead of the ATA IDENTIFY command. We also use 16-byte pass-through
ATA passthrough instead of 12-byte passthrough to avoid clashing with
the MMC BLANK command.
This means that we get this output
# udevadm info -q all -p /sys/devices/pci0000:00/0000:00:01.1/host3/target3:0:0/3:0:0:0
P: /devices/pci0000:00/0000:00:01.1/host3/target3:0:0/3:0:0:0
E: UDEV_LOG=3
E: DEVPATH=/devices/pci0000:00/0000:00:01.1/host3/target3:0:0/3:0:0:0
E: DEVTYPE=scsi_device
E: DRIVER=sr
E: MODALIAS=scsi:t-0x05
E: SUBSYSTEM=scsi
E: ID_ATA=1
E: ID_TYPE=cd
E: ID_BUS=ata
E: ID_MODEL=VBOX_CD-ROM
E: ID_MODEL_ENC=VBOX\x20CD-ROM\x20\x20\x20\x20\x20\x20\x20\x20\x20\x20\x20\x20\x20\x20\x20\x20\x20\x20\x20\x20\x20\x20\x 20\x20\x20\x20\x20\x20\x20
E: ID_REVISION=1.0
E: ID_SERIAL=VBOX_CD-ROM_VB2-01700376
E: ID_SERIAL_SHORT=VB2-01700376
instead of just
# udevadm info -q all -p /sys/devices/pci0000:00/0000:00:01.1/host3/target3:0:0/3:0:0:0
P: /devices/pci0000:00/0000:00:01.1/host3/target3:0:0/3:0:0:0
E: UDEV_LOG=3
E: DEVPATH=/devices/pci0000:00/0000:00:01.1/host3/target3:0:0/3:0:0:0
E: DEVTYPE=scsi_device
E: DRIVER=sr
E: MODALIAS=scsi:t-0x05
E: SUBSYSTEM=scsi
E: ID_SCSI=1
E: ID_VENDOR=VBOX
E: ID_VENDOR_ENC=VBOX\x20\x20\x20\x20
E: ID_MODEL=CD-ROM
E: ID_MODEL_ENC=CD-ROM\x20\x20\x20\x20\x20\x20\x20\x20\x20\x20
E: ID_REVISION=1.0
E: ID_TYPE=cd
Signed-off-by: David Zeuthen <davidz@redhat.com>
Systemd was unconditionally replacing all tags with own.
The net effect was udev-acl tag was lost and devices were
not given proper ACLs, making them inaccessible.
Before:
{pts/0}% udevadm info --query property --name sr0
DEVNAME=/dev/sr0
[...]
TAGS=:systemd:
{pts/0}% getfacl /dev/sr0
getfacl: Removing leading '/' from absolute path names
# file: dev/sr0
# owner: root
# group: cdrom
user::rw-
group::rw-
other::---
After:
{pts/0}% udevadm info --query property --name sr0
DEVNAME=/dev/sr0
[...]
TAGS=:udev-acl:systemd:
{pts/0}% getfacl /dev/sr0
getfacl: Removing leading '/' from absolute path names
# file: dev/sr0
# owner: root
# group: cdrom
user::rw-
user:bor:rw-
group::rw-
mask::rw-
other::---
Signed-off-by: Andrey Borzenkov <arvidjaar@gmail.com>
The '-l' option is already taken by fsck.ext[234]:
"-l bad_blocks_file Add to badblocks list"
This reverts commit cf1a105550 but keeps
the string changes.
In a multi-initiator setup, the HBA may very well export a SCSI device
for a device that another initiator has already logged into. But since
another initiator has already logged in, the kernel will not create a
block device.
Note that this is also the case for some RAID HBAs - for example, the
LSI 1068 series cards will export a SCSI device for a disk that is in
use by the HBAs RAID engine (no block device will be created here).
Running scsi_id and ata_id on the actual SCSI device means that we can
inquire the capabilities of the device. For example, we can check
whether ID_ATA_FEATURE_SET_SMART and ID_ATA_FEATURE_SET_SMART_ENABLED
is set and, if so, periodically poll the SMART status of the
disk. Even when other initiators has claimed the disk and if the disk
is in use by the RAID engine of the HBA.
Note that we run scsi_id and ata_id on /dev/bsg/* nodes - this is safe
to do because the scsi core guarantees that the bsg device has been
created before the actual add uevent for the scsi_device is emitted.
Since the block device is a direct child of the scsi_device we can
avoid running scsi_id and ata_id again by simply importing the
resulting ID_* properties from the parent.
Signed-off-by: David Zeuthen <davidz@redhat.com>
This makes it possible to use /dev/bsg/* nodes for ata_id:
# /lib/udev/ata_id --export /dev/bsg/0\:0\:0\:0
ID_ATA=1
ID_TYPE=disk
ID_BUS=ata
ID_MODEL=INTEL_SSDSA2MH080G1GC
ID_MODEL_ENC=INTEL\x20SSDSA2MH080G1GC\x20\x20\x20\x20\x20\x20\x20\x20\x20\x20\x20\x20\x20\x20\x20\x20\x20\x20\x20
ID_REVISION=045C8802
[...]
This means that our cd-rom detection as per commit
http://git.kernel.org/?p=linux/hotplug/udev.git;a=commit;h=160b069c25690bfb0c785994c7c3710289179107
needs to be reworked since we can't just use the CDROM_GET_CAPABILITY
ioctl on a /dev/bsg node (which is a character device). We do this by
just sending the SCSI INQUIRY command and checking the type (CD-ROM's
are all type 0x05 and disks are type 0x00) before we issue the ATA
IDENTIFY command through the SCSI command ATA PASS_THROUGH (12).
(Yes, it's a bit perverse how we have to tunnel our ATA commands
through a SCSI command but that's how Linux currently work.)
We still support for SG_IO version 3 (we fail back if version 4 fails
with EINVAL) because testing reveals that some drivers (such as
mpt2sas) still only support version 3 on the block nodes.
Signed-off-by: David Zeuthen <davidz@redhat.com>
Lennart Poettering
Kay Sievers
Andrew Edmunds
Andrey Borzenkov
Ran Benita
Jakub Wilk
Bastien Nocera
Brandon Philips
David Zeuthen
Michael Biebl