We have "installed tests", but don't provide an easy way to run them.
The protocol is very simple: each test must return 0 for success, 77 means
"skipped", anything else is an error. In addition, we want to print test
output only if the test failed.
I wrote this simple script. It is pretty basic, but implements the functions
listed above. Since it is written in python it should be easy to add option
parsing (like running only specific tests, or running unsafe tests, etc.)
I looked at the following alternatives:
- Ubuntu root-unittests: this works, but just dumps all output to the terminal,
has no coloring.
- @ssahani's test runner [2]
It uses the unittest library and the test suite was implented as a class, and
doesn't implement any of the functions listed above.
- cram [3,4]
cram runs our tests, but does not understand the "ignore the output" part,
has not support for our magic skip code (it uses hardcoded 80 instead),
and seems dead upstream.
- meson test
Here the idea would be to provide an almost-empty meson.build file under
/usr/lib/systemd/tests/ that would just define all the tests. This would
allow us to reuse the test runner we use normally. Unfortunately meson requires
a build directory and configuration to be done before running tests. This
would be possible, but seems a lot of effort to just run a few binaries.
[1] https://salsa.debian.org/systemd-team/systemd/blob/242c96addb06480ec9cd75248a5660f37a17b4b9/debian/tests/root-unittests
[2] https://github.com/systemd/systemd-fedora-ci/blob/master/upstream/systemd-upstream-tests.py
[3] https://bitheap.org/cram/
[4] https://pypi.org/project/pytest-cram/Fixes#10069.
"because blacklisted" is not grammatical, it should be something like
"becuase it is blacklisted", which in turn in too verbose. Let's use
a shorter form.
This effectively reverts 2bc54be485
and relevant changes in #9920, as it is used to determine the version
of udev, e.g., dracut.
Fixesdracutdevs/dracut#468.
This reverts commit d4e9e574ea.
(systemd.conf.m4 part was already reverted in 5b5d82615011b9827466b7cd5756da35627a1608.)
Together those reverts should "fix" #10025 and #10011. ("fix" is in quotes
because this doesn't really fix the underlying issue, which is combining
DynamicUser= with strict container sandbox, but it avoids the problem by not
using that feature in our default installation.)
Dynamic users don't work well if the service requires matching configuration in
other places, for example dbus policy. This is true for those three services.
In effect, distros create the user statically [1, 2]. Dynamic users make more
sense for "add-on" services where not creating the user, or more precisely,
creating the user lazily, can save resources. For "basic" services, if we are
going to create the user on package installation anyway, setting DynamicUser=
just creates unneeded confusion. The only case where it is actually used is
when somebody forgets to do system configuration. But it's better to have the
service fail cleanly in this case too. If we want to turn on some side-effect
of DynamicUser=yes for those services, we should just do that directly through
fine-grained options. By not using DynamicUser= we also avoid the need to
restart dbus.
[1] https://salsa.debian.org/systemd-team/systemd/commit/bd9bf307274faca24699c0c2d67cb86f18c0b2cb
[2] https://src.fedoraproject.org/rpms/systemd/blob/48ac1cebdedb055d9daf3dfe28c7bde80103f7a1/f/systemd.spec#_473
(Fedora does not create systemd-timesync user.)
systemd-tmpfiles-setup.service needs to be ordered after
systemd-journald.service, so entries in /run/log/journal are already
created when systemd-tmpfiles tries to adjust its permissions.
This is specially problematic for setups using a volatile journal where
the initrd does not ship a machine-id (i.e. OSTree-based systems), where
logs from the initrd will be inaccessible for users in the
systemd-journal group. It also has a side effect of `journalctl --user`
failing with "No journal files were opened due to insufficient
permissions".
Fixes#10128.
We would create a useless empty directory under build/.
It seems we were lucky and all symlinks were installed into directories
which were alredy created because we installed something into the same
location earlier.
While at it, also add '-v' to 'mkdir -p'. This will print the names of
directories as they are created (just once), making it easier to see all of
what the install script is doing.
In order to shut down networkd properly, the delegated routes added
need to be removed properly, and as error reporting is wanted, the
network link is needed in the debug output.
Solve this by calling manager_dhcp6_prefix_remove_all(), which will
remove each prefix stored in the Manager structure, and while doing
that reference each link so that it isn't freed before the route
removal callback is called. This in turn causes the network link to
be referenced once more, and an explicit hashmap_remove() must be
called to remove the network link from the m->links hashmap.
Also, since the registered callback is not called when the DHCPv6
client is stopped with sd_dhcp6_client_stop(), an explicit call
to dhcp6_lease_pd_prefix_lost() needs to be made to clean up any
unreachable routes set up for the delegated prefixes.
Instead of setting many small unreachable routes for each of the /64
subnets that were not distributed between the links requesting delegated
prefixes, set one unreachable route for the size of the delegated
prefix. Each subnet asssigned to a downstream link will add a routable
subnet for that link, and as the subnet assigned to the downstream link
has a longer prefix than the whole delegated prefix, the downstream
link subnet routes are preferred over the unroutable delegated one.
The unreachable route is not added when the delegated prefix is exactly
a /64 as the prefix size cannot be used to sort out the order of routing
into a bigger blocking subnet with the smaller /64 punching routable
"holes" into it.
When stopping the DHCPv6 client, the unroutable delegated prefix is
removed before the downstream link prefixes are unassigned.
Since we now have the possibility to request prefixes to be delegated
without corresponding IPv6 addresses, it does not make sense to store
lease T1 and T2 timeouts in the otherwise unused IA_NA structure.
Therefore lease timeouts T1 and T2 are moved to the DHCPv6 client
structure, as there will be only one set of stateful timeouts required
by RFC 7550, Section 4.3.
Select T1 and T2 timeouts based on whether addresses or prefixes were
requested and what the server offered. The address and prefix timeouts
values have been computed earlier when the relevant DHCPv6 options were
parsed.
Add function to fetch the IAID for the delegated IA_PD prefix. In
order to keep things simple in the implemntation, the same IAID
is used with IA_NA addresses and IA_PD prefixes. But the DHCPv6
server can choose to return only IA_PD prefixes, and the client
can nowadays omit requesting of IA_NA addresses. Since the function
fetching said IAID from the lease looks only for IA_NA ones, it
will return an empty IAID, which of course does not match the one
set for prefixes.
Fix this by adding a function returning the IAID for the prefix.
RFC 7084, WPD-4, requires Customer Edge end routers to behave
according to the following:
"WPD-4: By default, the IPv6 CE router MUST initiate DHCPv6 prefix
delegation when either the M or O flags are set to 1 in a
received Router Advertisement (RA) message. Behavior of the
CE router to use DHCPv6 prefix delegation when the CE router
has not received any RA or received an RA with the M and the
O bits set to zero is out of scope for this document."
Since it cannot be automatically detected whether DHCPv6 is to be
operated as an CE end router or whether to initiate an Informational
exchange to obtain other useful network information via DHCPv6 when the
Router Advertisement 'O' bit is set, a 'ForceDHCPv6PDOtherInformation'
boolean network configuration option in the '[DHCP]' section of a is
introduced. Setting this option causes DHCPv6 to be started in stateful
mode, although only the 'O' bit is seen in the Router Advertisement.
When 'ForceDHCPv6PDOtherInformation' is set and the Router Advertisement
has only the Other information 'O' bit set, disable requests for IA_NA
addresses.
Fixes#9745.
Add function to enable/disable IA_NA address requests. Internally
handle the request as a bit mask and add IA_PD prefix delegation
to the same bit mask instead of having a separate boolean. Thus
the calling code can set requests for prefix and address delegation
separately. This is handy when supporting RFC 7084.
Add a check in the code that at least something is requested from
the server in Managed mode. By default request IA_NA addresses from
the DHCPv6 server. Although a value has been defined for IA_TA,
temporay IA_TA addresses are not yet requested.
Add helper function for fetching enabled/disabled state of Prefix
Delegation for a DHCPv6 client. Update function setting prefix
delegation to use an int instead of a boolean.
Both 'systemd-hwdb update' and 'udevadm hwdb --update' creates hwdb
database. The database created by systemd-hwdb containes additional
information such that priority, line number, and source filename.
The unified function 'hwdb_update()' can take a flag 'compat' which
controls the format version of created database.
This reverts commit 48d3e88c18.
I kept the follow-symlink=false → follow-symlink=true change instact, since
we're likely to have existing installations with a symlink now.
Zbigniew Jędrzejewski-Szmek
Dimitri John Ledkov
Yu Watanabe
João Paulo Rechi Vita
Patrik Flykt