Previously, we'd use a link as "default" route depending on whether
there are route-only domains defined on it or not. (If there are, it
would not be used as default route, if there aren't it would.)
Let's make this explicit and add a link variable controlling this. The
variable is not changeable from the outside yet, but subsequent commits
are supposed to add that.
Note that making this configurable adds a certain amount of redundancy,
as there are now two ways to ensure a link does not receive "default"
lookup (i.e. DNS queries matching no configured route):
1. By ensuring that at least one other link configures a route on it
(for example by add "." to its search list)
2. By setting this new boolean to false.
But this is exactly what is intended with this patch: that there is an
explicit way to configure on the link itself whether it receives
'default' traffic, rather than require this to be configured on other
links.
The variable added is a tri-state: if true, the link is suitable for
recieving "default" traffic. If false, the link is not suitable for it.
If unset (i.e. negative) the original logic of "has this route-only
routes" is used, to ensure compatibility with the status quo ante.
The function dns_server_limited_domains() was very strange as it
enumerate the domains associated with a DnsScope object to determine
whether any "route-only" domains, but did so as a function associated
with a DnsServer object.
Let's clear this up, and replace it by a function associated with a
DnsScope instead. This makes more sense philosphically and allows us to
reduce the loops through which we need to jump to determine whether a
scope is suitable for default routing a bit.
Previously, we'd return DNS_SCOPE_MAYBE for all domain lookups matching
LLMNR or mDNS. Let's upgrade this to DNS_SCOPE_YES, to make the binding
stronger.
The effect of this is that even if "local" is defined as routing domain
on some iface, we'll still lookup domains in local via mDNS — if mDNS is
turned on. This should not be limiting, as people who don't want such
lookups should turn off mDNS altogether, as it is useless if nothing is
routed to it.
This also has the nice benefit that mDNS/LLMR continue to work if people
use "~." as routing domain on some interface.
Similar for LLMNR and single label names.
Similar also for the link local IPv4 and IPv6 reverse lookups.
Fixes: #10125
I looked over the diff, and it seems it's only additions and fixes, no removals.
The diff for the source files is much bigger, but it seems that the sorting
code is working well.
Let's not use atoi() if we can simply provide the project version as a number.
In C code, this is the numerical project version. In substitutions in other
files, this is just the bare substitution.
The "PACKAGE_" prefix is from autotools, and is strange. We call systemd a
"project", and "package" is something that distros build. Let's rename.
PACKAGE_URL is renamed to PROJECT_URL for the same reasons and for consistency.
(This leave PACKAGE_VERSION as the stringified define for C code.)
There are various functions to set the DUID of a DHCPv6 client.
However, none of them allows to set arbitrary data. The closest is
sd_dhcp6_client_set_duid(), which would still do validation of the
DUID's content via dhcp_validate_duid_len().
Relax the validation and only log a debug message if the DUID
does not validate.
Note that dhcp_validate_duid_len() already is not very strict. For example
with DUID_TYPE_LLT it only ensures that the length is suitable to contain
hwtype and time. It does not further check that the length of hwaddr is non-zero
or suitable for hwtype. Also, non-well-known DUID types are accepted for
extensibility. Why reject certain DUIDs but allowing clearly wrong formats
otherwise?
The validation and failure should happen earlier, when accepting the
unsuitable DUID. At that point, there is more context of what is wrong,
and a better failure reason (or warning) can be reported to the user. Rejecting
the DUID when setting up the DHCPv6 client seems not optimal, in particular
because the DHCPv6 client does not care about actual content of the
DUID and treats it as opaque blob.
Also, NetworkManager (which uses this code) allows to configure the entire
binary DUID in binary. It intentionally does not validate the binary
content any further. Hence, it needs to be able to set _invalid_ DUIDs,
provided that some basic constraints are satisfied (like the maximum length).
sd_dhcp6_client_set_duid() has two callers: both set the DUID obtained
from link_get_duid(), which comes from configuration.
`man networkd.conf` says: "The configured DHCP DUID should conform to
the specification in RFC 3315, RFC 6355.". It does not not state that
it MUST conform.
Note that dhcp_validate_duid_len() has another caller: DHCPv4's
dhcp_client_set_iaid_duid_internal(). In this case, continue with
strict validation, as the callers are more controlled. Also, there is
already sd_dhcp_client_set_client_id() which can be used to bypass
this check and set arbitrary client identifiers.
sd_dhcp_client_set_client_id() is the only API for setting a raw client-id.
All other setters are more restricted and only allow to set a type 255 DUID.
Also, dhcp4_set_client_identifier() is the only caller, which already
does:
r = sd_dhcp_client_set_client_id(link->dhcp_client,
ARPHRD_ETHER,
(const uint8_t *) &link->mac,
sizeof(link->mac));
and hence ensures that the data length is indeed ETH_ALEN.
Drop additional input validation from sd_dhcp_client_set_client_id(). The client-id
is an opaque blob, and if a caller wishes to set type 1 (ethernet) or type 32
(infiniband) with unexpected address length, it should be allowed. The actual
client-id is not relevant to the DHCP client, and it's the responsibility of the
caller to generate a suitable client-id.
For example, in NetworkManager you can configure all the bytes of the
client-id, including such _invalid_ settings. I think it makes sense,
to allow the user to fully configure the identifier. Even if such configuration
would be rejected, it would be the responsibility of the higher layers (including
a sensible error message to the user) and not fail later during
sd_dhcp_client_set_client_id().
Still log a debug message if the length is unexpected.
The function to replacement paths into the configuration file list was borked.
Apart from the crash with empty root prefix, it would incorrectly handle the
case where root *was* set, and the replacement file was supposed to override
an existing file.
prefix_root is used instead of path_join because prefix_root removes duplicate
slashes (when --root=dir/ is used).
A test is added.
Fixes#11124.
Generators run in a context where waiting for udev is not an option,
simply because it's not running there yet. Hence, let's not wait for it
in this case.
This is generally OK to do as we are operating on the root disk only
here, which should have been probed already by the time we come this
far.
An alternative fix might be to remove the udev dependency from image
dissection again in the long run (and thus replace reliance on
/dev/block/x:y somehow with something else).
Fixes: #11205
This reverts commit 89f9752ea0.
This patch causes various problems during boot, where a "mount storm" occurs
naturally. Current approach is flakey, and it seems very risky to push a
feature like this which impacts boot right before a release. So let's revert
for now, and consider a more robust solution after later.
Fixes#11209.
> https://github.com/systemd/systemd/pull/11196#issuecomment-448523186:
"Reverting 89f9752ea0 and fcfb1f775e fixes this test."
PACKAGE_VERSION is more explicit, and also, we don't pretend that changing the
project name in meson.build has any real effect. "systemd" is embedded in a
thousand different places, so let's just use the hardcoded string consistently.
This is mostly in preparation for future changes.
The starting of mount units requires that changes to
/proc/self/mountinfo be processed before the SIGCHILD from the
completion of /sbin/mount is processed, as described by the comment
/* Note that due to the io event priority logic, we can be sure the new mountinfo is loaded
* before we process the SIGCHLD for the mount command. */
The recently-added mount-storm protection can defeat this as it
will sometimes deliberately delay processing of /proc/self/mountinfo.
So we need to disable mount-storm protection when a mount unit is starting.
We do this by keeping a counter of the number of pending
mounts, and disabling the protection when this is non-zero.
Thanks to @asavah for finding and reporting this problem.
Apparently this originated in PHP, so the json output could be directly
embedded in HTML script tags.
See https://stackoverflow.com/questions/1580647/json-why-are-forward-slashes-escaped.
Since the output of our tools is not intended directly for web page generation,
let's not do this unescaping. If needed, the consumer can always do escaping as
appropriate for the target format.
read_line() is a lot more careful and optimized than read_nul_string()
but does mostly the same thing. let's replace the latter by the former,
just with a special flag that toggles between the slightly different EOL
rules if both.
Lennart Poettering
Zbigniew Jędrzejewski-Szmek
Yu Watanabe
Frantisek Sumsal
Hans de Goede
Jeremy Su
Thomas Haller
Chris Down
NeilBrown