Some interfaces require that the DHCPOFFER message is sent via broadcast
if they can't receive unicast messages before they've been configured
with an IP address.
E.g., s390 ccwgroup network interfaces operating in layer3 mode face
this limitation. This can prevent the interfaces from receiving an
IP address via DHCP, if the have been configured for layer3.
To allow DHCP over such interfaces, we're introducing a new device
property ID_NET_DHCP_BROADCAST which can be set for those.
The networkd DHCP client will check whether this property is set
for an interface, and if so will set the broadcast flag, unless
the network configuration for the interface has an explicit
RequestBroadcast setting.
Besides that, we're adding a udev rule to set this device property
for ccwgroup devices operating in layer3 mode, which is the case
if the ID_NET_DRIVER property is qeth_l3.
Supercedes #18829
Similar to sd_bus_error_has_names() that was added in
2b07ec316a.
It is made inline in the hope that the compiler will be able to optimize
all the va_args boilerplate away, and do an efficient comparison when
the arguments are all constants.
This PR made modification on Lennart Poettering's basis. Fix the LineMax's function failure problem.
Signed-off-by: Yangyang Shen <shenyangyang4@huawei.com>
Let's exit early if we are invoked to generate an fsck unit for the
rootfs or /usr of the initrd itself. The "systemd-root-fsck.service" and
"systemd-usr-fsck.service" units are after all for the host file
systems, and the initrd file hierarchy is from an unpacked cpio anyway.
Hence, this semantically doesn't really make sense, so quickly exit if
we detect this case. This allows us to remove some checks further down
the codepath.
Previously, if DUID-UUID is used, all configurations are configured
after networkd gets product uuid of machine.
This makes only DHCP clients are delayed, and other configs are
configured earlier.
This teaches repart to look for the root block device both as the
backing for /sysroot and for /sysusr/usr.
The latter is a new addition, and starts making more sense with the next
commit. It's about supporting systems that are shipped with only a /usr/
fs, but where a root fs is allocated and formatted on first boot via
systemd-repart (or a similar tool). In this case it's useful to be able
to mount the ultimate /usr/ early on without mounting the root fs
right-away (simple because the rootfs might not exist yet, and we need
the repart data encoded in /usr/ to actually format it). Hence, instead
of requiring that we mount /sysroot/ first and /sysroot/usr/ second as
we did so far, let's rearrange things slightly:
1. We mount the /usr/ file system we discover to /sysusr/usr/
2. We mount the root file system we discover to /sysroot/
3. Once both are established we bind mount /sysusr/usr/ to /sysroot/usr/
And that' it. The first two steps can happen in either order, and we can
access /usr/ with or without a rootfs being around.
This commit implements nothing of the above. Instead, it teaches
systemd-repart to check both /sysroot/ and /sysusr/ for repart drop-ins,
and use the first of these hierarchies it finds populated. This way
systemd-repart can be spawned once /usr is mounted and it will work
correctly without root fs having to exist, or we can invoke it when the
root fs is already mounted, where it also will work correctly.
This changes the fstab-generator to handle mounting of /usr/ a bit
differently than before. Instead of immediately mounting the fs to
/sysroot/usr/ we'll first mount it to /sysusr/usr/ and then add a
separate bind mount that mounts it from /sysusr/usr/ to /sysroot/usr/.
This way we can access /usr independently of the root fs, without for
waiting to be mounted via the /sysusr/ hierarchy. This is useful for
invoking systemd-repart while a root fs doesn't exist yet and for
creating it, with partition data read from the /usr/ hierarchy.
This introduces a new generic target initrd-usr-fs.target that may be
used to generically order services against /sysusr/ to become available.
This tries to shorten the race of device reuse a bit more: let's ignore
udev database entries that are older than the time where we started to
use a loopback device.
This doesn't fix the whole loopback device raciness mess, but it makes
the race window a bit shorter.
This is similar to the preceding work to store the uevent seqnum, but
this stores the CLOCK_MONOTONIC timestamp.
Why? This allows to validate udev database entries, to determine if they
were created *after* we attached the device.
The uevent seqnum logic allows us to validate uevent, and the timestamp
database entries, hence together we should be able to validate both
sources of truth for us.
(note that this is all racy, just a bit less racy, since we cannot
atomically attach loopback devices and get the timestamp for it, the
same way we can't get the uevent seqnum. Thus is shortens the race
window, but doesn#t close it).
We already store a CLOCK_MONOTONIC timestamp for each device appearance,
let' make this queriable.
This is useful to determine whether a udev device database entry is from
a current appearance of the device or a previous one, by comparing it
with appropriately taken timestamps.
Let's drop all monitor uevent that were enqueued before we actually
started setting up the device.
This doesn't fix the race, but it makes the race window smaller: since
we cannot determine the uevent seqnum and the loopback attachment
atomically, there's a tiny window where uevents might be generated by
the device which we mistake for being associated with out use of the
loopback device.
Later, this will allow us to ignore uevents from earlier attachments a
bit better, as we can compare uevent seqnums with this boundary. It's
not a full fix for the race though, since we cannot atomically determine
the uevent and attach the device, but it at least shortens the window a
bit.
Previously, loop_device_make() would return the device fd in one success
code path, but not the other (where' we'd just return 0).
loop_device_open() returns it in all cases.
Hence, let's clean this up, and make sure in all success code paths of
both functions we return it (even though it strictly speaking is
redundant, since we return it in LoopDevice anyway, and currently noone
actually relies on this).
the `man systemd.service` say:
Defaults to the setting DefaultOOMPolicy= in systemd-system.conf(5) is set to
but there is no such line in this config.
This is the default value I extracted from
systemctl show --property=DefaultOOMPolicy
Even if we set up a loopback device read-only and mount it read-only
this means nothing, ext4 will still write through to the backing storage
file.
Yes, I lost 6h debugging time on this.
Apparently, we have to specify "norecovery" when mounting such file
systems, to force them into truly read-only mode. Let's do so.
Let's make the GPT partition flags configurable when creating new
partitions. This is primarily useful for the read-only flag (which we
want to set for verity enabled partitions).
This adds two settings for this: Flags= and ReadOnly=, which strictly
speaking are redundant. The main reason to have both is that usually the
ReadOnly= setting is the one wants to control, and it' more generic.
Moreover we might later on introduce inherting of flags from CopyBlocks=
partitions, where one might want to control most flags as is except for
the RO flag and similar, hence let's keep them separate.
Viktor Mihajlovski
Zbigniew Jędrzejewski-Szmek
Yangyang Shen
Lennart Poettering
Yu Watanabe
Frantisek Sumsal
Yegor Alexeyev
Miroslav Suchý
Luca Boccassi