Commit Graph
1339 Commits
Author SHA1 Message Date
Aleksander Morgado 53b500c11d iface-modem-location: handle the NMEA-based GPS location source 2012-03-29 09:18:03 +02:00
Aleksander Morgado 1cfab89719 base-modem: use new `MMGpsSerialPort' type for the raw GPS port 2012-03-29 09:17:53 +02:00
Aleksander Morgado a0b3663274 gps-serial-port: new type to handle read-only serial ports with GPS traces 2012-03-29 09:17:53 +02:00
Aleksander Morgado 6d50e5195f serial-port: forced close only to be done once 2012-03-29 09:17:53 +02:00
Aleksander Morgado ceefa2c356 location: rework to allow multiple location sources
Location sources can now be enabled or disabled by using the mask of sources
given in Setup() (similar previous Enable()).
2012-03-29 09:17:53 +02:00
Aleksander Morgado be633fd66b base-modem: handle GPS control and data ports
Plugin may specify GPS-specific port tyeps when requesting to grab the port.
These could either be an AT-based GPS control port, or the raw GPS serial port
which emits the NMEA traces.
2012-03-28 15:50:51 +02:00
Aleksander Morgado b19f97ae7d port: new `MM_PORT_TYPE_NET' for pure net devices
Net devices will be MMPorts of type MM_PORT_TYPE_NET.
2012-03-28 15:50:51 +02:00
Aleksander Morgado 3b481cf17f base-modem: no need for `port_grabbed()'
Subclasses can configure additional stuff in the ports just after all have been
organized, in the SETUP_PORTS initialization step in MMBroadbandModem.
2012-03-28 15:50:51 +02:00
Aleksander Morgado 8dfbf195c1 port: skip LAST enums in glib-mkenums processing 2012-03-28 15:50:51 +02:00
Aleksander Morgado 68421638f5 at-serial-port: new flag to define the GPS control port 2012-03-28 15:50:51 +02:00
Aleksander Morgado 79c93f4333 at-serial-port: define flags by shifting bits
Otherwise glib-mkenums doesn't take the enumeration as being flags.
2012-03-28 15:50:51 +02:00
Aleksander Morgado 62923f9086 serial-port: ensure we close the port when forcing to close it 2012-03-28 15:50:43 +02:00
Aleksander Morgado b8157228eb broadband-modem: plug memleak when uppercasing storage names 2012-03-28 15:50:43 +02:00
Aleksander Morgado 029cb2abe9 broadband-modem: plug memleak when building AT command 2012-03-28 15:50:43 +02:00
Aleksander Morgado b29eb54080 sim: plug memleak 2012-03-28 15:50:43 +02:00
Aleksander Morgado 121c543711 sim: fix completion of pin-puk check 2012-03-28 15:50:43 +02:00
Aleksander Morgado 45e4f390eb charsets: plug memleak 2012-03-28 15:50:43 +02:00
Aleksander Morgado f07d3748c6 broadband-modem: fix error reporting in the modem initialization sequence
The initialization sequence doesn't expect any result, so
`mm_base_modem_at_sequence_finish()' will actually return NULL even if there is
no error. Therefore, we base the success of the sequence on the existence of a
GError in the return.
2012-03-26 13:49:02 +02:00
Aleksander Morgado e69d4974ef broadband-modem: use current charset when parsing operator name 2012-03-26 13:37:41 +02:00
Aleksander Morgado 46fa15c603 broadband-modem: initialize the Simple interface even if unlocked
We should be able to unlock the modem during Simple Connect().
2012-03-26 12:54:17 +02:00
Aleksander Morgado fec294b226 plugin: bump major plugin version
The PluginBase object got modified during the new codebase development, and
therefore we need to ensure that the current codebase doesn't try to load old
plugins.
2012-03-26 11:19:05 +02:00
Aleksander Morgado f6d8c52bc9 iface-modem: do not try to set new allowed/preferred config if modem already in there 2012-03-26 09:35:09 +02:00
Aleksander Morgado 41a592b535 iface-modem: treat ANY in allowed modes as being equal to the list of supported modes 2012-03-24 19:16:53 +01:00
Aleksander Morgado d841916c4f port-probe: don't probe product string if vendor string probing failed 2012-03-23 18:25:58 +01:00
Aleksander Morgado e2730d6a02 port-probe: probed vendor/product string will be NULL when error probing 2012-03-23 18:25:58 +01:00
Dan Williams d41d62f577 serial: fix crash when sending some commands to a closed port (lp:963102)
If the command we're sending doesn't have a callback, don't try
to call NULL.  Triggered if the port got closed (because the modem
crashed, or refcounting errors or whatever) with some code like this:

    mm_at_serial_port_queue_command (MM_AT_SERIAL_PORT (port), "+CREG=0", 3, NULL, NULL);
2012-03-23 10:58:59 -05:00
Aleksander Morgado 46d16d5c99 libmm-common: new common uint/int/str parsers 2012-03-18 17:28:14 +01:00
Aleksander Morgado 3046059aff iface-modem-3gpp: if already registered as requested, don't try to register from scratch 2012-03-16 15:52:36 +01:00
Aleksander Morgado 6bb90d92e4 iface-modem-simple: try to skip initial steps in the Simple Connect sequence 2012-03-16 15:38:09 +01:00
Aleksander Morgado 295272196d iface-modem-simple: don't request to connect the bearer if already connected 2012-03-16 15:37:37 +01:00
Aleksander Morgado 29b955afa2 iface-modem: if we are already unlocked, don't try to check it again
We're assuming here we are never getting locked without us knowing it.
2012-03-16 15:37:12 +01:00
Aleksander Morgado 1dbe4a12cf iface-modem-simple: don't call the enable() methods in the class directly
Use the new `mm_base_modem_enable()' instead, which will pass down the
modem-wide cancellable to the enable() implementation.
2012-03-16 15:21:56 +01:00
Aleksander Morgado 686cfbb2c0 iface-modem-simple: don't assume bearer is always set 2012-03-16 15:21:01 +01:00
Aleksander Morgado f2fee29968 broadband-bearer: pass down cancellable to the 3gpp dialing implementation 2012-03-16 15:20:40 +01:00
Aleksander Morgado 93b4256fb6 broadband-bearer: pass down CID to the 3GPP-specific disconnection logic 2012-03-16 14:53:26 +01:00
Aleksander Morgado cd7d4c3019 broadband-bearer: let subclasses handle their own IP config retrieval mechanism
Mainly given for bearers requiring static IP addresses in net ports.
2012-03-16 14:53:26 +01:00
Aleksander Morgado 6900348b64 broadband-bearer: let subclasses know the CID being used 2012-03-16 14:53:26 +01:00
Aleksander Morgado fe13d4cb66 broadband-bearer: ensure a result is always set
Just a convenience, as it is anyway not used afterwards.
2012-03-16 14:53:26 +01:00
Aleksander Morgado 473c5fee4d bearer: properties are exposed before exporting the bearer object
And we let subclasses to specify which of the input properties need to be
exposed.
2012-03-16 14:53:26 +01:00
Aleksander Morgado 15e9943036 plugin-base: avoid launching AT probing on new ports if the modem expects only one
If we got an existing modem showing a new port, and the plugin handling that modem
said that only one AT port was expected, we shouldn't be AT-probing it any more.
2012-03-16 14:53:25 +01:00
Aleksander Morgado 29f23f2a49 base-modem: new method to check if the modem got any AT port
Required for the single-at logic in the plugins.
2012-03-16 14:53:25 +01:00
Aleksander Morgado 3eb4220caa port-probe: new probing result setters
We make them public, so that we can set results before actually running the
probing.
2012-03-16 14:53:25 +01:00
Aleksander Morgado d2559e2716 plugin-base: only cancel AT probing in probes of the same device 2012-03-16 14:53:25 +01:00
Aleksander Morgado c52762ea67 build: require gudev >= 147
Since udev 147 the gudev API is no longer marked as experimental, and therefore
`G_UDEV_API_IS_SUBJECT_TO_CHANGE' is no longer needed.
2012-03-16 14:53:25 +01:00
Aleksander Morgado 703ab2590b port-probe: probing may just require vendor or product probing
If we already had probed, e.g. AT capabilities, and a next plugin requires
Vendor AT probing, the task will only show that VENDOR_AT is requested.
2012-03-16 14:53:25 +01:00
Aleksander Morgado 56e7b15f5c base-modem: ensure we cancel any ongoing operation when we're disposing 2012-03-16 14:53:24 +01:00
Aleksander Morgado 09026ed89a iface-modem: treat serial errors also as fatal when checking unlock status 2012-03-16 14:53:24 +01:00
Aleksander Morgado e2a56ba490 iface-modem-time: let initialization and enabling sequences get cancelled 2012-03-16 14:53:24 +01:00
Aleksander Morgado 9eebb75ca3 iface-modem-messaging: let initialization and enabling sequences get cancelled 2012-03-16 14:53:24 +01:00
Aleksander Morgado 2c4a69b190 iface-modem-location: let initialization and enabling sequences get cancelled 2012-03-16 14:53:24 +01:00