This message gets printed for all netdevs and ttys, including most
machines normal ethernet/Wi-Fi interfaces. It seems a bit less critical
than 'warning' level would indicate.
ModemManager[32097]: <warn> Couldn't find support for device at '/sys/devices/pci0000:00/0000:00:19.0': not supported by any plugin
ModemManager[32097]: <warn> Couldn't find support for device at '/sys/devices/pci0000:00/0000:00:1c.1/0000:02:00.0': not supported by any plugin
If for any reason the modem is in OFF state and still can talk to the modem,
allow running the remaining transition requests to LOW or ON. This can happen
for example for modems that use CFUN:0, i.e. which can still go online with
CFUN=1.
https://bugs.freedesktop.org/show_bug.cgi?id=89368
We really do need a wait time to make sure most ports are exposed by the
kernel, so that plugin filters based on "forbidden-drivers" work correctly. E.g.
the "gobi" plugin now flags as forbidden the "qmi_wwan" driver, which means that
modems exposing both TTYs and QMI/WWAN ports should never be handled by the Gobi
plugin.
Some new devices, like the Dell DW5770, will return an internal error when
trying to bring the power mode to online. We can avoid this by sending the
magic "DMS Set FCC Auth" message before retrying.
Bumping libqmi version to 1.13.4, which is the one that supports this new
message.
https://bugzilla.kernel.org/show_bug.cgi?id=92101
MM probing appears to make 'visor' module die; and anyway
most of the devices driven by 'visor' are not phones, and
of the 3 that are phones they are so old (2002 - 2005 era)
that nobody is likely using them for dialup anymore.
http://www.spinics.net/lists/linux-usb/msg120483.html
Since commit 2d700043ab ("core: use g_unix_signal_add() for more
reliable Unix signal handling") we no longer have to stick to
signal-safe functions in the SIGTERM/SIGINT handler.
Use exit() to terminate so that the clean-up functions are ran and code
coverage data gets written into files.
Build all targets, except for CLI tools (mmcli, uml290), with special
flags needed for collecting code coverage information when the build has
been configured with --enable-code-coverage.
Three new targets are available in the top build directory:
- `check-code-coverage' runs the test suite and generates a code
coverage report,
- `code-coverage-capture' generates a code coverage report from already
collected data, which can come in handy when one wants to see code
paths touched by a particular test,
- `code-coverage-clean' removes the collected coverage data and the
generated reports.
This facility cannot be retrieved via 'DMS UIM Get CK Status' and seems
currently unimplemented for mm-broadband-modem-qmi. The SIM enabled
status is however available via 'DMS UIM Get PIN Status'.
Using this message to add the retrieval of PIN status just after the
other facilities were queried.
Succesfully tested with Gobi2000 (05c6:9205), both retrieval of 3gpp
SIM lock status and enabling/disabling the PIN.
Bluetooth serial devices are weird. They begin life being bound with
RFCOMMCREATEDEV ioctl() and then move around the sysfs tree when they are
connected and disconnected. The connection is estabilished upon the first
open() and torn down upon last close(), their first user virtually being
"owner" of the connection. We don't want to be that process, we're only
interested in actually connected modems. However, currently we have no
knowledge of that and therefore we connect and disconnect multiple times while
probing.
This patch marks unconnected RFCOMM devices as uninteresting to us.
The actual connection and disconnection will be handled by NetworkManager.
For certain devices the name changes with their status. Notably, RFCOMM
devices move from /devices/virtual/ to underneath the HCI that is used
for the connection as the session is estabilished, and return back when
it's torn down.
My modem (Samsung GI B3740) responded "IPV4" to "CGDCONT=?". This was
not handled in mm-modem-helpers.c. The obvious fix was to return
MM_BEARER_IP_FAMILY_IPV4.
When the MBIM modem unexpectedly loses connection the port state never
gets set as disconnected thus when trying to reestablish a new
connection the bearer cannot find a port in the disconnected state.
Signed-off-by: Greg Suarez <gpsuarez2512@gmail.com>
b28230411 moved up the self->priv->forced_close = TRUE, which
caused mm_port_serial_close() to just return without actually
closing the port and cleaning up.
Also, cancel the reopen separately from closing the port since
the two operations are actually independent of each other.
This patch fixes the registration reporting/checking when ModemManager is
built with --with-newest-qmi-commands. apply_cs and apply_ps were not
properly initialised and may never be true. Also fixes a CnP error for
mm_ps_registration_state.
Signed-off-by: David McCullough <david.mccullough@accelecon.com>
This patch fixes the signal strength values when using ModemManager built
with --with-newest-qmi-commands.
It was never getting a valid signal strength because the default (0) is
always greater than a valid signal strength, and the rssi_max handling
was completely wrong.
Signed-off-by: David McCullough <david.mccullough@accelecon.com>
Dan Williams
Jason Simmons
Daniele Palmas
Aleksander Morgado
Jakub Sitnicki
Tyler
Torsten Hilbrich
Lubomir Rintel
Oskar Enoksson
Greg Suarez
David McCullough