mmcli is GPLv2+; that's what --version has always said and that's what the
README in ModemManager sources specifies:
License.
The ModemManager and mmcli binaries are both GPLv2+.
The libmm-glib library is LGPLv2+.
Standard GPS setup (raw/nmea) will both enable the GPS module and take full
control of the GPS port. This prevents other processes from reading the NMEA
traces from e.g. a tty. In order to handle this, a new 'unmanaged' GPS location
source is introduced, which will just enable/disable the GPS module, without
reading anything from the GPS port. Of course, both raw/nmea and unmanaged
setups cannot be enabled at the same time.
The logic to decide whether a property is valid in a given PDU type is kind of
fuzzy for 3GPP2 as it is currently implemented; so just print whatever we have
in the interface.
Along with a new '--cdma-activate-manual-with-prl'.
These can be used to request CDMA Manual Activation, like:
$> sudo mmcli \
-m 0 \
--cdma-activate-manual="spc=123456,sid=ab,mdn=0123456789abcde,min=0123456789abcde"
Or:
$> sudo mmcli \
-m 0 \
--cdma-activate-manual="spc=123456,sid=ab,mdn=0123456789abcde,min=0123456789abcde" \
--cdma-activate-manual-with-prl=/path/to/my/prl.data
We will expose a new 'Ports' property listing all ports currently known by a
given modem. Ports which are not used but are detected as being part of the
modem will be listed with an 'unknown' port type.
This change uses the new 'MMModemPortType' enum and the new 'MMModemPortInfo'
helper struct to handle these values in libmm-glib. The already available
'MMPortType' enum hasn't been re-used for the interface because it contains
values that we don't need (e.g. IGNORED).
The port list is now also included in the modem information command of mmcli:
$ sudo mmcli -m 0
/org/freedesktop/ModemManager1/Modem/0 (device id '97b7b99e3e2bea103880545b619fb05a3cc81b26')
-------------------------
System | device: '/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.4'
| drivers: 'qcserial, qmi_wwan'
| plugin: 'Gobi'
| primary port: 'cdc-wdm0'
| ports: 'ttyUSB0 (qcdm), ttyUSB1 (at), cdc-wdm0 (qmi), wwp0s29u1u4 (net)'
https://bugzilla.gnome.org/show_bug.cgi?id=702678
And also make it a list of masks, specifying which are the specific combinations
supported, not just one mask with all.
E.g.:
-------------------------
Hardware | manufacturer: 'Sierra Wireless, Incorporated'
| model: 'MC7710'
| revision: 'SWI9200X_03.05.19.04ap r5475 carmd-en-10527 2012/09/17 17:57:14'
| supported: 'gsm-umts
| gsm-umts, lte'
| current: 'gsm-umts, lte'
| equipment id: '358178040668164'
We now have a single 'CurrentModes' property which contains both values in a
tuple with signature "(uu)".
Also, rename 'SetAllowedModes()' to 'SetCurrentModes()', and update the list of
arguments expected to have a single "(uu)" tuple.
We want to expose in the Modem interface the list of supported IP families, and
the easiest way to do so is to have the IP family as flags, and provide in the
interface a single enum.
Also, a value of 0 for a MMBearerIpFamily specifies that no flags are set, so
just rename it to 'NONE'.
And add a new 'ANY' value which sets all flags to 1.
We don't want to support only 'relative' validity, so don't assume that the
Validity property will always be a uint32 value.
Instead, we define the Validity propery as '(uv)' tuple, where the first value
(a MMSmsValidityType) specifies the type of validity, and the second value is
a variant formatted accordingly to what the validity type specifies (e.g. a
uint32 value if the type is MM_SMS_VALIDITY_TYPE_RELATIVE).
Aleksander Morgado
Marco Bascetta
Riccardo Vangelisti
Dan Williams
Ben Chan
Aleksander Morgado
Thieu Le