This new interface allows modems to expose the list of available
connection profiles stored in the device and edit or delete them; as
long as the underlying device/protocol allows it.
Define a new helper object which we're going to use to implement the
new profile management interface.
The 3GPP profile object provides the list of settings that modems may
be able to store in their profile list, e.g. "apn", "ip-type" and so
on. Not all modems will be able to support all the settings defined in
the profile object, and therefore, when looking for a specific 3GPP
profile object with a given set of settings, we must make sure we only
compare those settings that are supported by the modem.
The profile management implementation will be able to load during
runtime a set of "compare flags", specifying which settings should not
be checked during the comparison. E.g. a generic AT-based modem that
supports only "apn" and "ip-type" will be compared with the
NO_APN_TYPE and NO_AUTH flags; and an AT/Icera-based modem (which
supports auth settings) will use only NO_APN_TYPE.
The settings in the 3GPP profile should be considered a subset of the
bearer properties.
The ModemManager1.Sim.PreferredNetworks property contains the preferred
networks (and access technologies, if available) configured to the
SIM card.
This commit implements preferred networks reading with AT+CPOL.
The autoconf macros AX_COMPILER_FLAGS_{CFLAGS|GIR|LDFLAGS} test
for compiler and linker support of various flags, and add the flags to
the generated output.
If the command-line option '--enable-compile-warnings' is specified to
'configure', a number of additional warning options is also added to the
output. This is the default.
This update requires the presence of the GNU autoconf-archive in the
system.
Those Roman numeral suffixes in MM_MODEM_BAND_EUTRAN_* were replaced
with 1, 2, 3, ..., etc. This patch adds a compatibility header,
ModemManager-compat.h, to alias the old MM_MODEM_BAND_EUTRAN_* values to
the new values.
This commit enables a new core ModemManager daemon option, so that automatic
detection of available modems is totally disabled: '--no-auto-scan'. Note that
this option also replaces the previously used '--test-no-auto-scan' option,
which was only used during tests.
Along with the new ModemManager option, a new ReportKernelEvent() method in
the API is defined, which allows notifying the daemon of which interfaces it
should be accessing, as well as the main details of each interface. The only
mandatory parameters in the new method are 'action' (add/remove), 'name' (the
name of the interface) and 'subsystem' (the subsystem of the interface).
The mmcli tool has support for using the new api method via several new options:
* The '--report-kernel-event' option allows specifying device ports one by
one, and is a direct mapping of the ReportKernelEvent() method:
$ sudo mmcli --report-kernel-event="action=add,name=wwan0,subsystem=net"
$ sudo mmcli --report-kernel-event="action=add,name=cdc-wdm0,subsystem=usbmisc"
* The '--report-kernel-event-auto-scan' option uses udev monitoring to notify
events automatically to the daemon. This allows to operate in a way
equivalent to the default daemon operation (with implicit auto-scan).
Worth noting that the ReportKernelEvent() method is only usable when
'--no-auto-scan' is explicitly used in the daemon. An error will be reported if
the method is tried while standard udev monitoring is enabled (implicit if
auto scan isn't explicitly disabled in the daemon).
If mmcli is going to be used only to report 'real time' events, an optional
'--initial-kernel-events=[PATH]' may be given in the ModemManager call to
automatically process a set of port kernel events one by one on boot. The file
may e.g. contain:
action=add,name=wwan0,subsystem=net
action=add,name=cdc-wdm0,subsystem=usbmisc
Build all targets, except for CLI tools (mmcli, uml290), with special
flags needed for collecting code coverage information when the build has
been configured with --enable-code-coverage.
Three new targets are available in the top build directory:
- `check-code-coverage' runs the test suite and generates a code
coverage report,
- `code-coverage-capture' generates a code coverage report from already
collected data, which can come in handy when one wants to see code
paths touched by a particular test,
- `code-coverage-clean' removes the collected coverage data and the
generated reports.
We will expose a new 'Ports' property listing all ports currently known by a
given modem. Ports which are not used but are detected as being part of the
modem will be listed with an 'unknown' port type.
This change uses the new 'MMModemPortType' enum and the new 'MMModemPortInfo'
helper struct to handle these values in libmm-glib. The already available
'MMPortType' enum hasn't been re-used for the interface because it contains
values that we don't need (e.g. IGNORED).
The port list is now also included in the modem information command of mmcli:
$ sudo mmcli -m 0
/org/freedesktop/ModemManager1/Modem/0 (device id '97b7b99e3e2bea103880545b619fb05a3cc81b26')
-------------------------
System | device: '/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.4'
| drivers: 'qcserial, qmi_wwan'
| plugin: 'Gobi'
| primary port: 'cdc-wdm0'
| ports: 'ttyUSB0 (qcdm), ttyUSB1 (at), cdc-wdm0 (qmi), wwp0s29u1u4 (net)'
https://bugzilla.gnome.org/show_bug.cgi?id=702678
It's pointless to have libmm-common around, just merge it into libmm-glib and
make ModemManager depend on libmm-glib directly. At the end, the non-common
stuff in libmm-glib is really minimal.
Renamed `MMCommonSimpleProperties' to `MMSimpleStatus', and removed the
`MMSimpleStatusProperties' provided in libmm-glib. We'll just use the original
one from libmm-common always.
Aleksander Morgado
lvmaorui
Teijo Kinnunen
Dan Williams
Ben Chan
Riccardo Vangelisti
Jakub Sitnicki
Aleksander Morgado
Colin Walters
Christian Persch