The SIM7600E ends up emitting these URCs with too many <CR>s, and the
generic +CRING handler doesn't catch them, interfering with other
actions, e.g.:
$ sudo mmcli --call 1 --accept
error: couldn't accept the call: 'GDBus.Error:org.freedesktop.ModemManager1.Error.Core.Failed: Couldn't accept the call: Unhandled response '+CRING: VOICE
+CRING: VOICE''
Just processing and parsing them for now, so that they don't interfere
with other commands:
$ sudo mmcli --call 1 --accept
error: couldn't accept the call: 'GDBus.Error:org.freedesktop.ModemManager1.Error.Core.Failed: Couldn't accept the call: Unhandled response '
VOICE CALL: BEGIN''
We will explicitly query for +AUTOCSQ and +CNSMOD support before
trying to enable them.
If +AUTOCSQ is supported and correctly enabled, we'll request signal
quality polling to be disabled.
If +CNSMOD is supported and correctly enabled, we'll request access
technology polling to be disabled.
The +AUTOCSQ setup enables automatic signal quality reporting via +CSQ
URCs, which unfortunately have the same format as the +CSQ command
responses.
Therefore, we need to subclass load_signal_quality() explicitly in
order to ignore those cases where the response to the +CSQ command is
received empty (already processed as a URC).
The logic to setup the generic +CIND indications in the SIM7600E seems
to end up breaking connectivity when in TTY+PPP mode. If we issue the
AT+CMER=3,0,0,1 command, this will end up in the modem not replying a
correct CONNECT response to the ATD command.
Let's disable these +CIND indications completely in the simtech
plugin, as there is even no AT command reference saying those are
supported.
Fixes https://gitlab.freedesktop.org/mobile-broadband/ModemManager/issues/144
And added support for several new things, including:
* Setting "any" band now attempts to set all supported bands.
* Added new 2G band value '5' (egsm+dcs+pcs+g850).
* Setup support for two different 3G band combinations, a default one
plus an alternate one applicable to the LM940/960 models only. The
alternate combination is selected via udev tags.
During the refactor, the following Telit-specific helpers were also
removed and exchanged with more generic counterparts.
* mm_telit_bands_contains() -> mm_common_bands_garray_lookup()
* mm_telit_get_band_flags_from_string() -> mm_parse_uint_list()
From 5s to 20s, as it seems it could take much more to complete and
get a response, as seen in the logs below.
<debug> [1568553228.546862] (ttyUSB3): --> 'AT+CNSMOD=1<CR>'
<debug> [1568553233.799470] (ttyUSB3): --> 'AT+AUTOCSQ=1,1<CR>'
<debug> [1568553238.798866] (ttyUSB3) setting up 3GPP unsolicited registration messages handlers
<debug> [1568553238.798932] (ttyUSB2) setting up 3GPP unsolicited registration messages handlers
<debug> [1568553238.798990] (ttyUSB3) device open count is 1 (close)
<warn> [1568553238.799029] (tty/ttyUSB3) at port timed out 2 consecutive times
<debug> [1568553238.799094] (ttyUSB3) device open count is 2 (open)
<debug> [1568553238.799148] (ttyUSB3): --> 'AT+CREG=2<CR>'
<warn> [1568553241.798727] (tty/ttyUSB3) at port timed out 3 consecutive times
<debug> [1568553241.798799] (ttyUSB3): --> 'AT+CREG=1<CR>'
<debug> [1568553244.795389] Enabling unsolicited registration events in primary port failed: 'AT sequence failed'
<debug> [1568553244.795462] (ttyUSB2) device open count is 2 (open)
<debug> [1568553244.795507] (ttyUSB3) device open count is 1 (close)
<warn> [1568553244.795545] (tty/ttyUSB3) at port timed out 4 consecutive times
<debug> [1568553244.795588] (ttyUSB2): --> 'AT+CREG=2<CR>'
<debug> [1568553244.800815] (ttyUSB3): <-- '<CR><LF>OK<CR><LF><CR><LF>OK<CR><LF>'
<debug> [1568553244.801624] (ttyUSB3): <-- '<CR><LF>OK<CR><LF><CR><LF>OK<CR><LF>'
<debug> [1568553244.808710] (ttyUSB2): <-- '<CR><LF>OK<CR><LF>'
This command will give us URCs whenever the extended list of current
calls changes, which includes information about the actual state of
each call, even for calls in waiting state.
Therefore, as this is a URC that applies to all calls, it's enabled
and disabled as part of the modem voice interface, instead of doing it
as part of the call object itself (i.e. not treated as an in-call URC).
Aleksander Morgado
Ben Chan
Sven Schwermer